【摘要】：為保證HY-2衛星高度計輸出數據的準確性和穩定性,提高其對海面風速的測量精度,提出了一種基于脈沖重建型有源定標器對HY-2高度計后向散射系數進行在軌定標的方法,開展了在軌定標實驗,得到了定標因子。將定標因子用于校正高度計測量的海面后向散射系數,并且與Jason2所測得的后向散射系數進行對比,取得了一致的結果,驗證了方法的可行性和準確性。
[Abstract]:In order to ensure the accuracy and stability of the HY-2 satellite altimeter output data and improve the accuracy of the sea surface wind speed measurement, An on-orbit calibration method for backscattering coefficient of HY-2 altimeter based on pulse reconstruction active scaler is proposed. The calibration experiment is carried out and the calibration factor is obtained. The calibration factor is used to calibrate the sea surface backscattering coefficient measured by the altimeter, and compared with the backscattering coefficient measured by Jason2, the results are consistent, and the feasibility and accuracy of the method are verified.
【作者單位】： 中國科學院國家空間科學中心微波遙感技術重點實驗室;中國科學院大學;
【分類號】：P715.6

【相似文獻】

相關博士學位論文 前1條

1 萬s，

本文編號：2409283