本文選題：反扭裝置　切入點：力學模型　出處：《中南大學學報(自然科學版)》2016年03期

【摘要】：對提供大扭矩的反扭裝置進行優化設計,并根據鉆頭實驗確定反扭裝置設計參數;提出反扭裝置設計原則,建立反扭裝置力學計算模型,并對不同尖角滑刀式反扭裝置進行理論計算,得出其徑向壓力和扭矩關系曲線,確定最佳的反扭滑刀參數;設計具有六連桿機構的滑刀式反扭裝置,根據其結構原理,建立彈簧剛度與徑向壓力理論計算模型,并對4種剛度彈簧進行優選。研究結果表明:采用剛度為19.61 N/mm的彈簧時,滑刀式反扭裝置理論上可提供73~94 N·m反扭矩,滿足冰下基巖鉆進的需要。
[Abstract]:The optimum design of the reverse torsion device with large torque is carried out, and the design parameters of the reverse torsion device are determined according to the bit experiment, and the design principle of the reverse torsion device is put forward, and the mechanical calculation model of the reverse torsion device is established.In addition, theoretical calculation is carried out for different angle slip knife reverse torsion devices, and the relationship curve between radial pressure and torque is obtained, and the optimum parameters of the reverse torsion cutter are determined, and the sliding knife reverse torsion device with six linkage mechanism is designed, and according to its structure principle,A theoretical model of spring stiffness and radial pressure is established, and four stiffness springs are selected.The results show that when the spring with stiffness of 19.61 N/mm is used, the slip type reverse torsion device can theoretically provide 73 94N m reverse torque, which can meet the need of subglacial bedrock drilling.
【作者單位】： 吉林大學建設工程學院;吉林大學極地研究中心;
【基金】：國家重大科研儀器設備研制專項(41327804)~~
【分類號】：P634.4

【相似文獻】

相關期刊論文 前2條

1 于成鳳;鄭治川;Pavel Talalay;曹品魯;范曉鵬;張云龍;;基于RecurDyn的極地冰下基巖取心鉆具反扭裝置的運動仿真及運動分析[J];探礦工程(巖土鉆掘工程);2013年12期

2 ;[J];;年期

相關博士學位論文 前1條

1 范曉鵬;極地冰下基巖取心鉆具反扭裝置與鉆頭鉆壓平衡關系研究[D];吉林大學;2014年

，

本文編號：1693842