發布時間：2018-03-31 19:09

  本文選題：潛孔鉆機　切入點：Pro/E　出處：《長安大學》2015年碩士論文

【摘要】：潛孔鉆機主要用于礦山開采、建筑、水利、電站、建材、交通及國防建設等多種工程中。與常見的鑿巖機相比,具有鉆孔深、鉆孔直徑大、鉆孔效率高、適應范圍廣等特點,是當前通用的大型鑿巖鉆孔設備。本文以潛孔鉆機為研究對象,綜述了潛孔鉆機的國內外研究現狀以及出現的問題,并針對國內潛孔鉆機存在的問題對其部分結構進行重新的設計。首先,運用有限元分析理論,通過Pro/E建模和ANSYS有限元分析軟件,對潛孔鉆機的主要零部件進行靜力學分析,得出了潛孔鉆機零部件在不同工況時的受力情況。解決了現有國產潛孔鉆機的安全系數過大的問題,為以后的鉆機設計提供了完備的方法思路。其次,以機械結構改進原則為基礎,通過對現有問題的分析,對潛孔鉆機部分結構提出改進方案。運用有限元分析理論和機械結構動力學理論,對改進后的鉆機結構進行靜力學和模態分析,進而得出潛孔鉆機的固有頻率和相應振型,確保鉆機在工作時不會產生共振現象。最后,通過機械結構優化方法,運用MATLAB工具箱對潛孔鉆機的改進結構進行優化設計,找出改進結構的最優解,提高結構件的質量利用系數。同時,利用ANSYS對優化后的模型進行有限元靜力學分析和整機的模態分析并與優化前的結構進行比較,得出優缺點。通過以上各項分析與研究,為提高潛孔鉆機的工作性能提供了一定的理論參考依據和工程應用價值。
[Abstract]:The downhole drilling rig is mainly used in mining, construction, water conservancy, power station, building materials, traffic and national defense construction and other projects. Compared with the common drilling machine, it has the characteristics of deep drilling, large diameter, high drilling efficiency, wide adaptability and so on. In this paper, the research status and problems of submersible drilling rig at home and abroad are summarized. According to the problems existing in the domestic submersible drilling rig, the structure of the drill is redesigned. Firstly, the static analysis of the main parts of the submersible drilling rig is carried out by using the finite element analysis theory, Pro/E modeling and ANSYS finite element analysis software. The stress condition of the drilling rig parts under different working conditions is obtained. The problem of excessive safety factor of the existing domestic drill rig is solved, which provides a complete method for the design of the drill rig in the future. Secondly, Based on the principle of mechanical structure improvement, through the analysis of the existing problems, the improvement scheme of the submersible drilling rig is put forward, and the finite element analysis theory and the mechanical structure dynamics theory are used. The static and modal analysis of the improved drilling rig structure is carried out, and the natural frequency and the corresponding vibration mode of the submersible drilling rig are obtained, so as to ensure that the drilling rig will not produce resonance phenomenon. Finally, through the mechanical structure optimization method, The improved structure of the submersible drilling rig is optimized by using MATLAB toolbox, the optimal solution of the improved structure is found, and the quality utilization coefficient of the structural parts is improved. The finite element static analysis and modal analysis of the optimized model are carried out by using ANSYS, and the advantages and disadvantages are obtained by comparing with the structure before optimization. It provides a certain theoretical reference and engineering application value for improving the working performance of submersible drilling rig.
【學位授予單位】：長安大學
【學位級別】：碩士
【學位授予年份】：2015
【分類號】：P634.31

【參考文獻】

相關期刊論文 前6條

1 楊天兵;張韜;;露天潛孔鉆機平臺的結構改進和有限元分析[J];建筑機械;2008年23期

2 郭勇;周振華;;潛孔鉆機的應用現狀與發展趨勢[J];礦業快報;2008年04期

3 曾傳儀;;地下潛孔鉆機的現狀與發展[J];湖南有色金屬;1990年06期

4 楊來銘;郭勇;謝雄;;潛孔鉆機卡鉆機理的分析研究[J];建筑機械;2009年01期

5 胡賦;趙宏;;SD L6全液壓履帶式露天潛孔鉆機[J];建筑機械;2014年11期

6 趙宏強,林宏武;SWD165一體化高性能潛孔鉆機[J];鑿巖機械氣動工具;2004年02期

相關碩士學位論文 前1條

1 田德雨;露天旋轉鉆機底架有限元分析及改進設計[D];昆明理工大學;2014年

，

本文編號：1692053