本文選題：巖石力學參數　切入點：測井評價　出處：《石油勘探與開發》2017年05期 　論文類型：期刊論文

【摘要】：利用測井資料來準確計算5個獨立的剛性系數(C_(11)、C_(33)、C_(44)、C_(66)和C_(13)),以解決橫觀各向同性快地層最小水平主應力的測井計算難題。通過聲速各向異性及黏土含量實驗測量,分析并建立了聲波各向異性系數與黏土含量的函數關系及不同剛性系數之間的轉換關系,在此基礎上建立了一套利用測井資料計算各向異性快地層剛性系數及最小水平主應力的方法。實際應用表明,該方法與僅適用于慢地層的基于水平橫波速度的計算方法互為補充,可用于評價致密油氣儲集層巖石力學參數,優選壓裂試油層段。
[Abstract]:Five independent rigid coefficients can be accurately calculated by using logging data. The functional relationship between acoustic anisotropy coefficient and clay content and the conversion relationship between different rigidity coefficients are analyzed and established. On this basis, a set of methods for calculating stiffness coefficient and minimum horizontal principal stress of anisotropic fast formation using logging data are established. The practical application shows that, This method is complementary to the calculation method based on horizontal shear wave velocity which is only suitable for slow formation. It can be used to evaluate the rock mechanics parameters of tight oil and gas reservoir and to select the fracturing test zone.
【作者單位】： 中國石油勘探開發研究院;中國石油長慶油田公司勘探開發研究院;中海石油有限公司湛江分公司南海西部石油研究院;
【基金】：國家科技重大專項(2016ZX05046-002)
【分類號】：P631.81;TE311
，

本文編號：1605359