本論文針對射頻和微波應用提出了頻率范圍為1.5-2.7 GHz的可調帶通濾波器。提出的濾波器用于實現高選擇性、尺寸微型化/小型化、寬帶和恒定絕對帶寬（CABW）的同時保持低插入損耗。尺寸微型化/小型化通過使用新型微帶階梯諧振器實現。高選擇性通過在通帶兩側引入兩個可控的傳輸零點獲得。寬帶和恒定絕對帶寬由一種新型微型化梳狀諧振器實現。在低損耗高選擇性的設計中,首先提出的是一種緊湊的具有獨立配置的第二通帶和高帶外抑制的單/雙頻帶濾波器。之后用相同的緊湊型接地階梯諧振器實現了一款頻率調諧范圍在1.58–1.88 GHz的低損耗可調濾波器,并加入了傳輸零點調諧特性來獲得更好的抑制水平。在寬帶和恒定絕對帶寬設計中,運用了一種新型的階梯梳狀諧振器來實現高度小型化的固定和可調帶通濾波器。首先使用這一結構設計了一款相對帶寬62.5%的寬帶濾波器,面積僅有6.5×8.5 mm²。另一款可調帶通濾波器具有寬調諧范圍1.6-2.7 GHz和恒定絕對帶寬（360±10）MHz,尺寸僅有6.7×8.7 mm²。此外,還引入了品質因數控制來進一步提高濾波器特性,同時提供了... 

【文章來源】：電子科技大學四川省 211工程院校 985工程院校 教育部直屬院校

【文章頁數】：89 頁

【學位級別】：碩士

【文章目錄】：
摘要
ABSTRACT
Chapter 1 Introduction
    1.1 Motivation
    1.2 Thesis Goals
    1.3 Thesis Outlines
Chapter 2 Background
    2.1 Basic Filter Theory
        2.1.1 Lowpass Prototype Filters
            2.1.1.1 Chebyshev Lowpass Prototype Response and Transfer Function
            2.1.1.2 Butterworth （Maximally-Flat） Lowpass Prototype Response and Transfer Function
            2.1.1.3 Quasi-Elliptic Lowpass Prototype Response and Transfer Function
        2.1.2 Immittance Inverters
        2.1.3 Lowpass to Bandpass Frequency Transformation
    2.2 Tuning Mechanisms
        2.2.1 Capacitance Tuning
        2.2.2 Inductance Tuning
        2.2.3 Capacitance-Inductance Tuning
    2.3 Tunable Filter Technology
        2.3.1 Mechanically Tunable Filters
        2.3.2 Ferroelectric BST Tunable filters
        2.3.3 Ferromagnetic YIG tunable filters
        2.3.4 RF-MEMS tunable filters
        2.3.5 Varactor based tunable filters
            2.3.5.1 Fundamental concepts of varactor diode
            2.3.5.2 Literature Overview of varactor-tuned microwave filters
Chapter 3 Compact Single/Dual-band Bandpass Filter
    3.1 Introduction
    3.2 Basic Design Theory
    3.3 Filter Design and Implementation
    3.4 Dual-bandpass Filter Design and Implementation
    3.5 Fabrication and measurements
    3.6 Summary
Chapter 4 High Selectivity Low-loss Tunable BPF with Transmission Zeros Control
    4.1 Introduction
    4.2 Filter Design & Implementation
        4.2.1 Design Procedure
        4.2.2 Implementation
    4.3 Fabrication and measurements
    4.4 Summary
Chapter 5 Compact Constant Bandwidth Tunable BPF with Wide Tuning Range and Bandwidth Control
    5.1 Introduction
    5.2 Compact Wideband Filter
        5.2.1 Design & Implementation
        5.2.2 Fabrication and measurements
    5.3 Compact constant bandwidth tunable filter with wide tuning range and bandwidth control
        5.3.1 Design & Implementation
        5.3.2 Bandwidth Control
        5.3.3 Fabrication and measurements
    5.4 Summary
Chapter 6 Conclusion and Future Work
    6.1 Conclusion and Contributions
    6.2 Future Work
Acknowledgements
References
Research Results Obtained During the Study for Master Degree



本文編號：3136382