【摘要】：構建一種微細粒度故障模型,有效地區分鏈路故障和通道故障,并在該模型的基礎上提出一種基于故障節點再利用的容錯路由算法.本算法由一個動態暫存機制(dynamic pseudo-receiving mechanism,DPR)和動態轉向控制(dynamic turn management,DTM)構成,分別用于暫存數據包和避免死鎖.最后實驗結果表明,本文算法較先前的容錯算法,時間延遲降低27%,吞吐量提高21%.尤其在數據包注入率增大時,本文方案有著明顯的優勢,保證了網絡的可靠性
[Abstract]:A fine granularity fault model is constructed to effectively divide link fault and channel fault, and a fault-tolerant routing algorithm based on the reuse of fault nodes is proposed on the basis of the model. This algorithm is composed of a dynamic temporary storage mechanism (dynamic pseudo-receiving mechanism,DPR) and a dynamic steering control (dynamic turn management,DTM), which are used to temporarily store data packets and avoid deadlocks, respectively. Finally, the experimental results show that compared with the previous fault-tolerant algorithm, the time delay of the proposed algorithm is reduced by 27%, and the throughput is increased by 21%. Especially when the packet injection rate increases, this scheme has obvious advantages and ensures the reliability of the network.
【作者單位】： 國家數字交換系統工程技術研究中心;
【基金】：國家自然科學基金項目(61572520)資助
【分類號】：TN47

【參考文獻】

相關期刊論文 前3條

1 張士鑒;韓國棟;沈劍良;柯t，

本文編號：2522588