【摘要】：為了提高發光二極管(LED)的散熱能力,基于煙囪效應,在傳統太陽花散熱器外側加裝圓筒壁,形成特殊的煙囪結構。運用Solidworks軟件構建三維模型,用其插件Flow Simulation進行熱仿真,并以散熱器翅片數12個、最大直徑70mm、高度40mm為基礎模型參數,進行優化研究。研究表明,在翅片數為20個、最大直徑為85mm、高度為65mm時,LED圓筒太陽花散熱器的散熱效果最好。此時,LED的最高溫度為48.98℃,比優化前降低了13.05℃。當功率為8,12,16,19W時,LED芯片的最高溫度都滿足LED工作的安全要求。對功率為8W的LED散熱器樣品的實驗測試結果表明,4個監測點的實際溫度與仿真所得溫度的平均誤差為4.8%,在允許范圍內,驗證了研究的正確性。在功率為32 W時,配備圓筒太陽花散熱器的芯片最高溫度仍滿足低于125℃的技術要求,并比配備傳統太陽花散熱器的芯片溫度低6.44℃。所設計的LED圓筒太陽花散熱器為解決大功率LED散熱問題提供了一個新的途徑。
[Abstract]:In order to improve the heat dissipation capacity of light emitting diode (LED), a special chimney structure is formed by installing cylinder wall on the outside of traditional sunflower radiator based on chimney effect. The three-dimensional model is constructed by Solidworks software, and the thermal simulation is carried out with its plug-in Flow Simulation, and the optimization research is carried out based on the number of radiator wings, maximum diameter 70mm, height 40mm as the basic model parameters. The results show that when the number of wings is 20, the maximum diameter is 85mm and the height is 65mm, the heat dissipation effect of LED cylinder sunflower radiator is the best. At this time, the maximum temperature of LED is 48.98 鈩，

本文編號：2506404