【摘要】：IGBT作為電力電子領域里的關鍵器件在行業內的地位不言而喻,IGBT驅動與保護也成為電力電子技術的重要發展方向。隨著技術研究的不斷深入,越來越多的IGBT驅動器問世,驅動與保護電路也從最初的主要由分立元件構成向芯片化、集成化轉變,但是現在市面上流行的集中主流驅動芯片或驅動器仍有不少缺陷,特別是在大功率應用條件下,電路復雜,設計成本較高。限制了電力電子裝置向大電壓、大電流、高頻率的發展。因此,對大功率IGBT的驅動與保護研究具有重要的意義。進行大功率IGBT驅動及過壓保護研究過程中發現,由于IGBT應用于高頻場合,IGBT過壓主要發生在IGBT關斷時過壓,通過saber對原有的幾種方案仿真并分析對比,針對原有的過壓保護方案提供了一種新的基于驅動電路的過壓保護方案。本文的目的是提供一種新的控制方法去優化IGBT關斷時的表現。由于在IGBT關斷時dtdi/會非常高,電路中的雜散電感會產生過壓。本文詳細的介紹了這種動態上升電壓控制電路(DVRC電路),這種電路通過對電壓上升斜率的抑制能夠很好的控制關斷過電壓,從而簡化了過壓保護電路的體積以及制作成本。通過saber仿真軟件驗證本方案的可行性,合理的設定相關參數。本文基于其結構原理和仿真驗證,設計了一套實驗驗證方案,搭建了一套有效的實驗平臺,在實驗的過程中不斷更改和優化電路結構,通過實驗驗證了動態上升電壓控制方案(新型DVRC電路)的可行性。
[Abstract]:As a key device in power electronics field, IGBT has a self-evident position in the industry. IGBT driving and protection have also become an important development direction of power electronics technology. With the development of technology research, more and more IGBT drivers come out, and the drive and protection circuits are changed from discrete components to chip and integration. However, there are still many defects in the popular centralized mainstream drive chip or driver, especially in the high power application, the circuit is complex and the design cost is high. It limits the development of power electronic devices to high voltage, high current and high frequency. Therefore, it is of great significance to study the drive and protection of high power IGBT. During the research of high power IGBT drive and overvoltage protection, it is found that because IGBT is used in high frequency field, IGBT overvoltage mainly occurs when IGBT is turned off. Several original schemes are simulated and compared with each other by saber. A new overvoltage protection scheme based on drive circuit is proposed for the original overvoltage protection scheme. The purpose of this paper is to provide a new control method to optimize the performance of IGBT turn-off. Because dtdi/ is very high when IGBT is turned off, stray inductors in the circuit can overvoltage. In this paper, the dynamic rising voltage control circuit (DVRC) is introduced in detail. This circuit can control the off overvoltage well by restraining the voltage rise slope, thus simplifying the volume and production cost of the overvoltage protection circuit. The feasibility of this scheme is verified by saber simulation software, and relevant parameters are set reasonably. Based on its structure principle and simulation verification, this paper designs a set of experimental verification scheme, builds an effective experimental platform, and constantly changes and optimizes the circuit structure in the process of experiment. The feasibility of the dynamic rising voltage control scheme (a new type of DVRC circuit) is verified by experiments.
【學位授予單位】：華南理工大學
【學位級別】：碩士
【學位授予年份】：2015
【分類號】：TN322.8

【參考文獻】

相關期刊論文 前10條

1 汪波;胡安;陳明;唐勇;;IGBT關斷瞬態電壓尖峰影響及抑制[J];半導體技術;2011年07期

2 長畦文男 ,王渤洪;導通瞬態時續流二極管(FWD)反向恢復現象[J];變流技術與電力牽引;2002年03期

3 雷明;程善美;于孟春;申勇哲;;基于有源箝位的IGBT過電壓抑制技術[J];變頻器世界;2012年04期

4 楊磊;張志峰;敬小勇;;IGBT關斷尖峰電壓抑制方法的研究[J];船電技術;2009年04期

5 亢寶位;;IGBT發展概述[J];電力電子;2006年05期

6 高健;許飛云;賈民平;彭森;;基于UC3843的CCM模式Boost變換器設計[J];電力電子技術;2010年01期

7 王正仕，，吳益良，向群，陳輝明;IGBT的過流保護[J];電力電子技術;1996年03期

8 張世輝;陳霞;;基于UC3843升壓式程控開關穩壓電源的設計[J];電腦開發與應用;2011年02期

9 付永生;IGBT柵極驅動電路的特性分析和應用[J];電氣開關;2005年04期

10 張全柱;黃成玉;鄧永紅;;逆變器用IGBT吸收電路的仿真研究[J];電源技術;2009年10期

相關碩士學位論文 前1條

1 趙勇;基于IGBT的大功率變頻電源的研制[D];山東大學;2006年

本文編號：2387468