基于碳化硅MOSFET變溫度參數模型的器件建模與仿真驗證
發布時間：2018-09-14 15:09
【摘要】：碳化硅(SiC)是新型功率半導體材料之一,具有禁帶寬、擊穿電場高、熱導率高、載流子漂移速率高、功率密集度高等諸多優點。以SiC材料為基礎的功率半導體器件以優越的性能引起了廣泛關注。其中,SiC MOSFET成為科研人員關注的熱點。隨著對SiC MOSFET研究的不斷深入,建立精確的SiC MOSFET器件模型是亟待解決的問題之一,成為研究的焦點。本文依托于國網智能電網研究院"1200V SiC MOSFET器件制備及應用特性關鍵技術研究”項目,針對SiCMOSFET器件建模展開了研究工作。本文調研了大量功率器件模型,對前人的模型進行了總結分析,沒有采用物理模型和傳統的硅(Si) MOSFET模型,而采用功率半導體界普遍認可的變溫度參數建模方法。本文以市場上使用最廣的CREE公司第二代SiC MOSFET器件為例,進行建模原理的分析與介紹。本文首先對CREE公司提供的Spice標準測試模型進行了靜態特性與動態特性測試,把此結果作為標準。然后,重點介紹了在PSpice軟件中建立SiC MOSFET變溫度參數模型的全過程。對從技術手冊中選取建模需要的參數進行了詳細介紹,給出了溫控電阻、溫度控制電壓源、溫度控制電流源在PSpice軟件中建模的具體方法,對未來的研究工作具有指導意義。將靜態模型在不同溫度點下的仿真結果與Spice標準測試模型的測試結果進行對比,驗證模型在不同溫度點下的有效性與準確性。最后,對動態建模進行了分析介紹,根據半導體器件理論知識,改變了前人對于靜態模型組成的劃分方法,將體二極管建模歸為動態建模部分,使建模更科學。對于影響動態特性的關鍵部分進行了詳細介紹。將動態仿真結果與Spice標準測試模型的測試結果進行對比,驗證模型動態特性的準確性。
[Abstract]:Silicon carbide (sic) (SiC) is one of the new power semiconductor materials, which has many advantages, such as wide band gap, high breakdown electric field, high thermal conductivity, high carrier drift rate, high power intensity and so on. Power semiconductor devices based on SiC materials have attracted wide attention due to their superior performance. Among them, sic MOSFET has become the focus of attention. With the development of SiC MOSFET research, the establishment of accurate SiC MOSFET device model is one of the problems to be solved and becomes the focus of research. In this paper, based on the project of "Research on the key Technologies of 1200V SiC MOSFET device Fabrication and Application characteristics" of China Smart Grid Research Institute, the research work on SiCMOSFET device modeling is carried out. In this paper, a large number of power device models have been investigated, and the previous models have been summarized and analyzed. Instead of physical model and traditional silicon (Si) MOSFET model, the widely accepted variable temperature parameter modeling method in power semiconductor field has been adopted. This paper analyzes and introduces the modeling principle of the second generation SiC MOSFET device of CREE Company, which is widely used in the market. In this paper, the static and dynamic characteristics of the Spice standard test model provided by CREE are tested, and this result is regarded as the standard. Then, the whole process of establishing SiC MOSFET variable temperature parameter model in PSpice software is introduced. This paper introduces in detail the parameters needed for modeling from the technical manual, and gives the methods of modeling temperature controlled resistor, temperature controlled voltage source and temperature controlled current source in PSpice software, which is of guiding significance for future research work. The simulation results of static model at different temperature points are compared with the test results of Spice standard test model to verify the validity and accuracy of the model at different temperature points. Finally, the dynamic modeling is analyzed and introduced. According to the theoretical knowledge of semiconductor devices, the former partition method of static model composition is changed, and the volume diode modeling is classified into dynamic modeling part, which makes the modeling more scientific. The key parts which affect the dynamic characteristics are introduced in detail. The dynamic simulation results are compared with the test results of the Spice standard test model to verify the accuracy of the dynamic characteristics of the model.
【學位授予單位】：華北電力大學
【學位級別】：碩士
【學位授予年份】：2015
【分類號】：TN386
本文編號：2243068
[Abstract]:Silicon carbide (sic) (SiC) is one of the new power semiconductor materials, which has many advantages, such as wide band gap, high breakdown electric field, high thermal conductivity, high carrier drift rate, high power intensity and so on. Power semiconductor devices based on SiC materials have attracted wide attention due to their superior performance. Among them, sic MOSFET has become the focus of attention. With the development of SiC MOSFET research, the establishment of accurate SiC MOSFET device model is one of the problems to be solved and becomes the focus of research. In this paper, based on the project of "Research on the key Technologies of 1200V SiC MOSFET device Fabrication and Application characteristics" of China Smart Grid Research Institute, the research work on SiCMOSFET device modeling is carried out. In this paper, a large number of power device models have been investigated, and the previous models have been summarized and analyzed. Instead of physical model and traditional silicon (Si) MOSFET model, the widely accepted variable temperature parameter modeling method in power semiconductor field has been adopted. This paper analyzes and introduces the modeling principle of the second generation SiC MOSFET device of CREE Company, which is widely used in the market. In this paper, the static and dynamic characteristics of the Spice standard test model provided by CREE are tested, and this result is regarded as the standard. Then, the whole process of establishing SiC MOSFET variable temperature parameter model in PSpice software is introduced. This paper introduces in detail the parameters needed for modeling from the technical manual, and gives the methods of modeling temperature controlled resistor, temperature controlled voltage source and temperature controlled current source in PSpice software, which is of guiding significance for future research work. The simulation results of static model at different temperature points are compared with the test results of Spice standard test model to verify the validity and accuracy of the model at different temperature points. Finally, the dynamic modeling is analyzed and introduced. According to the theoretical knowledge of semiconductor devices, the former partition method of static model composition is changed, and the volume diode modeling is classified into dynamic modeling part, which makes the modeling more scientific. The key parts which affect the dynamic characteristics are introduced in detail. The dynamic simulation results are compared with the test results of the Spice standard test model to verify the accuracy of the dynamic characteristics of the model.
【學位授予單位】：華北電力大學
【學位級別】：碩士
【學位授予年份】：2015
【分類號】：TN386
【參考文獻】
相關期刊論文 前1條
1 錢照明;盛況;;大功率半導體器件的發展與展望[J];大功率變流技術;2010年01期
，本文編號：2243068
本文鏈接：http://sikaile.net/kejilunwen/dianzigongchenglunwen/2243068.html
最近更新
教材專著
