工程化百瓦級綠光激光器研究
發布時間：2018-09-12 11:31
【摘要】：隨著全固態激光技術、調Q技術及非線性頻率變換技術的飛速蓬勃發展,全固態綠光激光器在科研、激光醫療、激光加工、軍事國防、及激光顯示等領域應用越來越廣泛。在激光顯示領域中,高功率紅、綠、藍三基色全固態激光技術作為激光彩色顯示的關鍵技術,屬于當前國際激光領域研究的前沿課題,深受研究者的關注。激光二極管泵浦全固態激光器(Diode Pump All-Solid State Laser,DPSSL)具有效率高、全固態化、穩定性、好壽命長、結構簡單緊湊、能獲得較高功率和良好光束質量激光輸出等優點。全固態激光器結合非線性光學倍頻技術是獲得全固態綠光激光器(Diode Pump All-Solid State Green Laser,DPSSGL)最具有發展前景的方案,即由半導體激光二極管或激光光源陣列泵浦激光增益介質獲得1064 nm基頻光,再結合調Q技術形成高峰值功率的1064nm脈沖激光,加入非線性倍頻晶體(例如KTP、LBO、BBO)實現高功率532nm綠光輸出。本課題在國家863項目“XXX激光光源研究”的背景下,展開對工程化百瓦級綠光激光器相關理論分析和實驗研究。最終,實現了光纖耦合輸出的126 W高功率全固態綠光激光器工程化樣機研制,光纖耦合效率90.3%,連續輸出綠光3個小時,功率波動小于±1.29%,該激光器運行穩定,532nm綠光平均功率及功率穩定性等符合項目技術指標要求。
[Abstract]:With the rapid development of all-solid-state laser technology, Q-switched technology and nonlinear frequency conversion technology, all-solid-state green laser is more and more widely used in scientific research, laser medical treatment, laser processing, military defense, and laser display and other fields. In the field of laser display, high power red, green and blue three-color all-solid-state laser technology, as the key technology of laser color display, is one of the frontier research topics in the international laser field, and has been paid close attention to by researchers. Laser diode pumped all-solid-state laser (Diode Pump All-Solid State Laser,DPSSL) has the advantages of high efficiency, all-solid-state, stability, long life, simple and compact structure, high power and good beam quality laser output. All-solid-state laser combined with nonlinear optical frequency-doubling technique is the most promising way to obtain all-solid-state green laser (Diode Pump All-Solid State Green Laser,DPSSGL). That is, 1064 nm fundamental frequency light is obtained by laser gain medium pumped by semiconductor laser diode or laser light source array, and 1064nm pulse laser with high peak power is formed by combining Q-switched technology. High power 532nm green light output is achieved by adding nonlinear frequency-doubling crystals (such as KTP,LBO,BBO). Under the background of the national 863 project "study of XXX laser light source", the related theoretical analysis and experimental research on the engineering 100-watt green laser are carried out. Finally, an engineering prototype of a 126W high power all-solid-state green laser with fiber coupling output is developed. The coupling efficiency of the fiber is 90.33.The green light is continuously output for 3 hours. The power fluctuation is less than 鹵1.29. The average power and power stability of the laser operating stably at 532 nm are in line with the technical requirements of the project.
【學位授予單位】：長春理工大學
【學位級別】：碩士
【學位授予年份】：2017
【分類號】：TN248
本文編號：2238873
[Abstract]:With the rapid development of all-solid-state laser technology, Q-switched technology and nonlinear frequency conversion technology, all-solid-state green laser is more and more widely used in scientific research, laser medical treatment, laser processing, military defense, and laser display and other fields. In the field of laser display, high power red, green and blue three-color all-solid-state laser technology, as the key technology of laser color display, is one of the frontier research topics in the international laser field, and has been paid close attention to by researchers. Laser diode pumped all-solid-state laser (Diode Pump All-Solid State Laser,DPSSL) has the advantages of high efficiency, all-solid-state, stability, long life, simple and compact structure, high power and good beam quality laser output. All-solid-state laser combined with nonlinear optical frequency-doubling technique is the most promising way to obtain all-solid-state green laser (Diode Pump All-Solid State Green Laser,DPSSGL). That is, 1064 nm fundamental frequency light is obtained by laser gain medium pumped by semiconductor laser diode or laser light source array, and 1064nm pulse laser with high peak power is formed by combining Q-switched technology. High power 532nm green light output is achieved by adding nonlinear frequency-doubling crystals (such as KTP,LBO,BBO). Under the background of the national 863 project "study of XXX laser light source", the related theoretical analysis and experimental research on the engineering 100-watt green laser are carried out. Finally, an engineering prototype of a 126W high power all-solid-state green laser with fiber coupling output is developed. The coupling efficiency of the fiber is 90.33.The green light is continuously output for 3 hours. The power fluctuation is less than 鹵1.29. The average power and power stability of the laser operating stably at 532 nm are in line with the technical requirements of the project.
【學位授予單位】：長春理工大學
【學位級別】：碩士
【學位授予年份】：2017
【分類號】：TN248
【參考文獻】
相關期刊論文 前1條
1 王與燁;徐德剛;劉長明;王衛鵬;姚建銓;;A high-power high-stability Q-switched green laser with intracavity frequency doubling using a diode-pumped composite ceramic Nd:YAG laser[J];Chinese Physics B;2012年09期
，本文編號：2238873
本文鏈接：http://sikaile.net/kejilunwen/dianzigongchenglunwen/2238873.html
最近更新
教材專著
