本文選題：白光LED + 相關色溫�。� 參考：《發光學報》2017年06期

【摘要】：為了快速確定白光LED相關色溫與黃色熒光粉濃度的關系,提出"中間參數A"的方法,以達到減少工作量,縮短工作時間,提高精度的目的。首先,通過理論分析推導出色品坐標與"中間參數A"的關系公式。然后,制備6組不同黃色熒光粉濃度的白光LED樣品,計算出每個濃度對應的A值,擬合A值與熒光粉濃度的關系公式。在色品圖上查找目標色溫對應的色坐標,就可以利用"中間參數A"的方法預測目標色溫對應的黃色熒光粉濃度。實驗結果表明:利用"中間參數A"的方法生產的白光LED的色溫與目標色溫的誤差在50 K以內。在預測高色溫時,該方法比"直接探索色溫與熒光粉濃度的關系"的方法的精度高一個數量級。而且利用該方法,采用2組不同熒光粉濃度樣品相比于6組樣品,在預測目標色溫對應的熒光粉濃度時的相差量低于0.5%。因此,該方法具有耗時短、工作量少,精度高的優點。
[Abstract]:In order to quickly determine the relationship between the relative color temperature of white LED and the concentration of yellow phosphor, the method of "intermediate parameter A" is put forward in order to reduce the workload, shorten the working time and improve the precision. Firstly, the formula of the relationship between the coordinate of excellent product and the intermediate parameter A is deduced by theoretical analysis. Then, six groups of white LED samples with different concentrations of yellow phosphor were prepared, and the corresponding A value of each concentration was calculated, and the relationship between A value and phosphor concentration was fitted. By looking up the color coordinates of the target color temperature on the color map, the method of "intermediate parameter A" can be used to predict the yellow phosphor concentration corresponding to the target color temperature. The experimental results show that the error between the color temperature and the target color temperature of the white LED produced by the method of "intermediate parameter A" is less than 50 K. In predicting high color temperature, the accuracy of this method is one order of magnitude higher than that of "directly exploring the relationship between color temperature and phosphor concentration". By using this method, the difference between two groups of samples with different phosphor concentration is less than 0.5 when the concentration of phosphor corresponding to the target color temperature is predicted compared with 6 groups of samples. Therefore, this method has the advantages of short time consuming, less workload and high precision.
【作者單位】： 華僑大學信息科學與工程學院;福建省光傳輸與變換重點實驗室;
【基金】：福建省光傳輸與變換重點實驗室開放基金(KF2016201)資助項目~~
【分類號】：TN312.8

【相似文獻】

相關期刊論文 前7條

1 宋國華;繆建文;施建珍;崔一平;;一種提高白光LED相關色溫分布均勻性的方法[J];光電子.激光;2010年07期

2 郭自泉;高玉琳;呂毅軍;林岳;陳煥庭;雷瑞瑞;陳瑩亮;陳忠;;固定相關色溫下三基色合成白光LED的光譜優化[J];光電子.激光;2011年07期

3 鮑超;超高亮度LED測量問題[J];液晶與顯示;2003年04期

4 梅毅;陳郁陽;袁川;劉木清;;LED溫度特性的測試[J];照明工程學報;2007年01期

5 肖華;呂毅軍;朱麗虹;王陽夏;陳國龍;高玉琳;林思琪;徐云鑫;;遠程熒光體白光發光二極管的發光性能[J];光子學報;2014年05期

6 賴安·弗萊徹;姚涵春;;LED照明與數字視頻[J];演藝科技;2012年02期

7 ;[J];;年期

相關會議論文 前1條

1 姚其;于曉秀;;基于函數法的PC LED相關色溫計算研究[A];海峽兩岸第十八屆照明科技與營銷研討會專題報告暨論文集[C];2011年

，

本文編號：1987305