本文選題：線掃描激光傳感器 + 全數據測量��； 參考：《光子學報》2017年11期

【摘要】：以標準球作為測量基準,以線掃描激光傳感器作為測量手段獲取透平葉片的全數據測量點云.測量設備采用四坐標測量機搭載激光線掃描傳感器的方式,以保證葉片的測量效率,并兼顧測量機的控制準確度.通過測量機獲得透平葉片的點云數據,并對獲得的截面點云數據進行誤差補償、去噪、簡化等預處理操作,利用非均勻有理B樣條曲線擬合算法得到葉片特征曲線.實驗結果證明該方法可以有效地提高葉片前后緣的重構準確度,并為葉片的三維建模提供更為準確的原始數據.
[Abstract]:Taking the standard ball as the measuring datum and using the line scanning laser sensor as a measuring method to obtain the full data measurement point cloud of the turbine blade. The measuring equipment uses the four coordinate measuring machine to carry the laser line scanning sensor to ensure the blade measurement efficiency and take into account the control accuracy of the measuring machine. Point cloud data are used to make error compensation, denoising, simplification and other preprocessing operations. The blade feature curves are obtained by using the non uniform rational B spline curve fitting algorithm. The experimental results show that the method can effectively improve the reconstruction accuracy of the blade edge and provide more accurate 3D modeling for the blade. Raw data.

【作者單位】： 西安交通大學機械制造系統工程國家重點實驗室;
【基金】：國家重點基礎研究發展計劃(No.2013CB035704-3) 國家自然科學基金(No.51421004) 中央高�；究蒲袠I(yè)務費專項資金(No.xjj2017016)資助~~
【分類號】：TH744.5
，

本文編號：1777426