發布時間：2018-04-11 22:01

  本文選題：銅碲渣 + 碲　； 參考：《有色金屬(冶煉部分)》2017年08期

【摘要】：采用硫酸化焙燒—水浸脫銅—堿浸提碲—電積工藝回收銅碲渣中的碲,考察了NaOH濃度、溫度等對碲浸出的影響,并對水解脫雜和碲電積工藝進行探索。結果表明,經過硫酸化焙燒、水浸后,銅脫除率為75%;電積產品碲純度為99.90%,綜合碲回收率約93%;金、銀、鉑和鈀等貴金屬進一步富集在堿浸渣中。
[Abstract]:The effect of NaOH concentration and temperature on the leaching of tellurium from copper tellurium slag was investigated by sulfation roasting, water leaching, alkali leaching and electrodeposition. The process of water removal and electrodeposition of tellurium was also explored.The results show that after sulfation roasting, the removal rate of copper is 75%, the purity of electrowinning product tellurium is 99.90, the comprehensive recovery of tellurium is about 93%, and the precious metals such as gold, silver, platinum and palladium are further enriched in alkali leaching slag.
【作者單位】： 廈門紫金礦冶技術有限公司;低品位難處理黃金資源綜合利用國家重點實驗室;
【基金】：福建省科學計劃區域發展項目(2015H4017)
【分類號】：TN304.14
，

本文編號：1737824