本文選題：液相法　切入點：球形　出處：《半導體技術》2017年01期 　論文類型：期刊論文

【摘要】：以Cd(NO_3)_2和Na_2SeSO_3的混合液為反應體系,采用液相法(絕氧環境)制備CdSe納米晶。探討了Cd與Se摩爾比、Na_2EDTA用量、反應溫度和反應時間等制備條件對樣品在模擬太陽光下光電性能的影響。結果表明,當n(Cd)∶n(Se)=6∶1時,加入25 m L0.16 mol/L Na2EDTA、在90℃下反應40 min所得CdSe納米晶薄膜具有較高的光電壓,其值約為0.387 7 V。X射線衍射儀(XRD)、能譜儀(EDS)以及掃描電子顯微鏡(SEM)表征結果顯示,位于25.354°最強衍射峰(111)晶面和60.943°最弱衍射峰(400)晶面處的CdSe納米晶粒尺寸分別為44.98 nm和17.82 nm;以Cd元素對CdSe進行歸一化處理后,樣品中Cd和Se元素原子數分數均為12.42%,質量分數分別為34.77%和24.42%;樣品CdSe納米晶體呈球形,分散均勻,直徑約為100 nm。
[Abstract]:The CdSe nanocrystalline was prepared by liquid phase method using the mixed solution of Cd(NO_3)_2 and Na_2SeSO_3 as reaction system. The dosage of Na2EDTA in the molar ratio of CD to se was discussed. The effect of reaction temperature and reaction time on the optoelectronic properties of the samples under simulated solar light was investigated. The results showed that the CdSe nanocrystalline films obtained by reaction at 90 鈩，

本文編號：1624730