本文選題：FIR數字濾波器　切入點：外推沖激響應　出處：《電子技術應用》2017年05期 　論文類型：期刊論文

【摘要】：外推補償技術利用FIR濾波器沖激響應的準周期特性進行系數外推,并將近似誤差補償回去,從而有效降低了多常系數乘法的復雜度,但延時鏈的增加是其固有特性,3種改進結構通過改變延時鏈位置來減小其位寬。綜合結果表明,改變輸入端延時鏈位置的改進結構能夠進一步降低FIR濾波器的硬件實現成本,具有較好的實用性。
[Abstract]:The extrapolation compensation technique makes use of the quasi-periodic characteristic of impulse response of FIR filter to extrapolate the coefficients and compensate the approximate error back, thus effectively reducing the complexity of multiplying multiple constant coefficients. But the increase of delay chain is its inherent characteristic and three kinds of improved structures can reduce the bit width by changing the position of delay chain. The synthesis results show that the improved structure can further reduce the hardware implementation cost of FIR filter by changing the position of the delay chain at the input end. It has good practicability.
【作者單位】： 浙江工業大學信息工程學院;杭州國芯科技股份有限公司;浙江財經大學信息學院;
【分類號】：TN713
，

本文編號：1563899