本文關鍵詞： 電阻補償 帶隙基準源 雙極工藝 溫度系數 線性調制率 電源抑制比　出處：《合肥工業大學學報(自然科學版)》2017年05期 　論文類型：期刊論文

【摘要】：文章分析了帶隙基準電壓源中電阻補償?shù)脑?使用2種不同溫度系數的電阻設計了一個低溫度系數新型雙極工藝帶隙電壓源電路,并基于CSMC 2μm36V雙極工藝對電路進行仿真,實現了對基極發射極電壓的三階補償。仿真結果表明,在10~30V輸入電壓范圍內,該帶隙電壓源輸出電壓為2.12V;電源抑制比為120.2dB的頻率點為14.85Hz;溫度變化范圍在-40~125℃時,溫度系數為2.17×10~(-6)/℃。
[Abstract]:In this paper, the principle of resistance compensation in bandgap voltage reference is analyzed, and a new type of band-gap voltage source circuit with low temperature coefficient is designed by using two kinds of resistors with different temperature coefficients. The circuit is simulated based on CSMC 2 渭 m 36V bipolar process, and the third-order compensation of the base emitter voltage is realized. The simulation results show that the input voltage is in the range of 10V / 30V. The output voltage of the bandgap voltage source is 2.12V; The power rejection ratio is 120.2dB and the frequency point is 14.85hz. When the temperature varies from -40 鈩，

本文編號：1490848