本文關鍵詞：全固態紫外激光器泵浦源驅動電路及高精度溫控研制　出處：《華中科技大學》2015年碩士論文　論文類型：學位論文

  更多相關文章： 激光二極管 恒流驅動 溫度控制 溫控算法 半導體制冷器

【摘要】：紫外激光波長短、聚焦性能好及可實現“冷加工”的特性,使之廣泛應用于醫療、高分辨光譜學、空間光通信、微加工等領域。近年來,激光二極管(Laser Diode,LD)泵浦的全固態紫外激光器(紫外DPSSL)因具有效率高、體積小、重復頻率高、性能穩定等特點已成為紫外激光器的主要發展方向。但是LD對工作環境要求比較高,LD的工作溫度與工作電流相互影響,電流和溫度的波動會改變LD的輸出波長和功率,進而影響全固態紫外激光器的輸出特性。因此,研制電流連續可調、長時間穩定度高的恒流驅動電路和高精度溫控系統是實現紫外DPSSL工業化的關鍵一環。本文設計的LD電源,主要內容有LD的驅動電路和高精度溫控兩部分。電源系統選用DSP F28335作為控制核心,由按鍵與液晶顯示面板組成的用戶界面完成對電源的控制。恒流驅動電路通過將高精度電流檢測電阻PBV-R010反饋的電壓值和設定電壓值分別輸入模擬比例-積分電路,經過電路運算處理輸出控制電壓,調節大功率調整管IRF150N的通斷程度來穩定電流。此外,恒流驅動電路設有硬件、軟件雙重過流保護及延時軟啟動功能,避免損壞激光二極管。高精度溫控系統選用由恒流模塊驅動的半導體制冷器進行制冷,制冷效率由分段積分的比例-積分-微分控制算法輸出控制量改變恒流模塊的電流值來調節。在5~26℃環境下對該電路系統進行6h連續工作測試,實現對雙路50W大功率激光二極管的恒流驅動及恒溫控制。驅動電流調節范圍1~8.8A,在驅動電路長時間工作于7.5A時,測得電流波動≤0.01A,穩定度達0.13%;溫控范圍為20~45℃,溫控精度達到±0.02℃。測試結果說明,本文設計的LD電源提供的恒流源和溫度控制調節范圍廣,控制精度高,能夠長時穩定工作,對紫外DPSSL工程化發展具有一定應用價值。
[Abstract]:Due to its short wavelength, good focusing performance and the ability to realize "cold working", UV laser has been widely used in medical treatment, high resolution spectroscopy, space optical communication, micro-processing and other fields in recent years. The all-solid-state ultraviolet laser (DPSSL) pumped by laser diode laser diode (LDD) has high efficiency, small volume and high repetition rate. The stability of performance has become the main development direction of ultraviolet lasers, but the LD has a high working environment requirements, the operating temperature and current influence each other. The fluctuation of current and temperature will change the output wavelength and power of LD, and then affect the output characteristics of all-solid-state UV laser. The constant current drive circuit with high stability for a long time and the high precision temperature control system are the key link to realize the industrialization of UV DPSSL. The LD power supply is designed in this paper. The main contents are LD driving circuit and high precision temperature control. DSP F28335 is selected as the control core of the power supply system. The user interface composed of keystrokes and LCD panel controls the power supply. The constant current drive circuit inputs the voltage value and the set voltage value of the high precision current detection resistor PBV-R010 respectively into the simulation. Proportional-integral circuit. The output control voltage is processed by circuit operation, and the on-off degree of IRF150N is adjusted to stabilize the current. In addition, the constant current driving circuit is equipped with hardware. Software dual over current protection and delay soft start function to avoid damage to laser diode. The high precision temperature control system uses semiconductor cooler driven by constant current module to refrigerate. The refrigeration efficiency is adjusted by changing the current value of the constant-current module by the output of the proportional integral-differential control algorithm of the piecewise integral. The circuit system is tested for 6 hours at 5 ~ 26 鈩，

本文編號：1439572