具有兩個傳輸零點的高溫陶瓷梳型帶狀線濾波器
本文關鍵詞:具有兩個傳輸零點的高溫陶瓷梳型帶狀線濾波器 出處:《重慶郵電大學學報(自然科學版)》2017年06期 論文類型:期刊論文
更多相關文章: 帶通濾波器 矩形金屬化孔 帶狀線 無載品質因數 高溫陶瓷 傳輸零點
【摘要】:提出一種具有2個傳輸零點的高溫陶瓷梳型帶狀線濾波器。該設計的新穎性在于提出了矩形金屬化孔代替?zhèn)鹘y(tǒng)矩形桿狀的帶狀線結構。在利用這種結構設計的四分之一波長諧振器中,通過增加其矩形金屬化孔的厚度,能夠有效地增強其無載品質因數,從而降低濾波器的插入損耗。研究發現,矩形金屬化孔結構設計的濾波器相比傳統帶狀線結構具有較低的差損。同時濾波器的高阻帶能夠產生2個零點,增加阻帶抑制和通帶選擇性。為了驗證所提出的結構,設計了一款二階濾波器,其測試與仿真結果較吻合。測試結果表明,濾波器具有低插損和小尺寸的特點。
[Abstract]:A high temperature ceramic comb strip line filter with two transmission 00:00 is proposed. The novelty of this design is that the rectangular metallized hole is proposed to replace the traditional rectangular rod shape strip line structure. In a fraction of a wavelength resonator. By increasing the thickness of the rectangular metallized holes, the no-load quality factor can be effectively enhanced, thus reducing the insertion loss of the filter. The filter with rectangular metallized hole structure has lower loss than the traditional strip structure, and the high stopband of the filter can produce 2 00:00. In order to verify the proposed structure, a second-order filter is designed, which is in good agreement with the simulation results. The test results show that the filter has the characteristics of low insertion loss and small size.
【作者單位】: 南通大學電子信息學院;南通大學杏林學院;
【基金】:國家自然科學基金(61501263) 江蘇省自然科學基金(BK20161281) 江蘇省南通市市級科技計劃項目(GY12016013,CP22014005,AA2014013)~~
【分類號】:TN713
【正文快照】: 0引言隨著無線通信的發展,無線通信設備的小型化技術在不斷地進步,為了適應現代無線通信對于濾波器越來越高的要求,小型化的濾波器,尤其是小型化帶通濾波器(bandpass filter,BPF)成為了無線通信系統中必不可少的選頻元件[1-2]。目前,已經有許多小型化的BPF生產工藝被開發和研
【相似文獻】
相關期刊論文 前10條
1 吳君;王魯豫;;平行帶狀線間加孔柵的抗耦合干擾技術研究[J];電子科技大學學報;2006年02期
2 郝春英;;無殼體帶狀線的設計[J];無線電工程;1990年04期
3 賈燕;陳文錄;張永華;;高頻基材介電參數帶狀線測試的誤差修正方法[J];印制電路信息;2014年04期
4 叢佩君;微波帶狀線組件生產過程的質量控制[J];微電子技術;2001年01期
5 石德萬;王文祥;魏彥玉;黃民智;;波導-帶狀線耦合傳輸?shù)姆治鯷J];廣西工學院學報;2010年01期
6 姬五勝;彭清斌;張需溥;陳玉兵;王大朋;;襯底型五級超寬帶帶狀線耦合器的設計[J];蘭州理工大學學報;2009年06期
7 杜建洪,,鄭興世,林貽 ;多平行圓桿帶狀線分布參數新計算方法及應用[J];中山大學學報(自然科學版);1994年02期
8 褚慶昕;周競科;;懸置帶狀線T接頭等效電路的提取[J];華南理工大學學報(自然科學版);2009年01期
9 龍純U
本文編號:1411579
本文鏈接:http://sikaile.net/kejilunwen/dianzigongchenglunwen/1411579.html