利用雙液浮選法回收硅片切割廢料中SiC的試驗研究
發布時間:2018-01-11 11:25
本文關鍵詞:利用雙液浮選法回收硅片切割廢料中SiC的試驗研究 出處:《硅酸鹽通報》2017年08期 論文類型:期刊論文
【摘要】:研究了以煤油作為捕收劑和載體回收硅片切割廢料中碳化硅的雙液浮選工藝。研究捕收劑用量、pH值、固液比及粒度對回收碳化硅純度的影響。通過單因素及正交試驗,綜合考慮極差分析和方差分析的結果,確定最優工藝條件為:捕收劑用量50 mL·g~(-1)、pH值為8.3、固液比為3∶400 g·mL~(-1)、粒度8.636μm,此條件下回收的碳化硅純度達到99.08%。采用雙液浮選工藝回收太陽能硅片切割廢料中的碳化硅粉體具有顯著的經濟效益和社會效益。
[Abstract]:The double liquid flotation process for recovering silicon carbide from silicon wafer cutting waste with kerosene as collector and carrier was studied. The amount of collector and pH value were studied. The effects of solid-liquid ratio and particle size on the purity of recovered silicon carbide were studied. The results of range analysis and variance analysis were considered synthetically by single factor and orthogonal test. The optimum technological conditions are determined as follows: the dosage of collector is 50 mL 路g ~ (-1), the pH value is 8.3, the ratio of solid to liquid is 3: 400 g 路mL ~ (-1), and the particle size is 8.636 渭 m. Under this condition, the purity of the recovered silicon carbide is 99.08. It has remarkable economic and social benefits to recover the silicon carbide powder from the cutting waste of solar silicon wafer by using the two-liquid flotation process.
【作者單位】: 青海大學新能源光伏產業研究中心;
【基金】:青海省西寧市高新科技項目(2011-G-02)
【分類號】:TN304
【正文快照】: 1引言在眾多可再生能源中,太陽能以其清潔性、安全性、充足性等成為人類最重要的無污染型新能源[1-3]。世界許多國家把太陽能光伏發電作為最具前景的發展產業。作為光伏發電的重要組成硅太陽能電池,其制造工藝的關鍵部分是把硅棒(錠)切割成為硅片。其工作原理是以金屬絲帶動磨,
本文編號:1409347
本文鏈接:http://sikaile.net/kejilunwen/dianzigongchenglunwen/1409347.html
最近更新
教材專著