【摘要】：針對某電廠2號機組長期存在發電機轉子6瓦軸振周期性振動超標的問題,分析了機組振動異常的原因和機理,闡明了碳刷與轉軸的碰摩是引起周期性振動的主要原因,經過對集電環刷架間隙進行調整,消除了機組在正常運行情況下的異常振動,通過高速動平衡降低了由于轉子熱應力變化導致6瓦振動爬升趨勢。
[Abstract]:In view of the problem that the periodic vibration of 6 watt shaft vibration of generator rotor No. 2 in a power plant exceeds the standard for a long time, this paper analyzes the causes and mechanism of abnormal vibration of the unit, and expounds that the rubbing between carbon brush and rotating shaft is the main cause of periodic vibration. Through adjusting the gap of collector ring brush frame, the abnormal vibration of the unit under normal operation is eliminated. Through high speed dynamic balance, the climbing trend of 6 watts vibration caused by the change of thermal stress of rotor is reduced.
【作者單位】： 中電華創電力技術研究有限公司;中電神頭發電有限責任公司;
【分類號】：TM311
，

本文編號：2520378