【摘要】：論述了適用于含分布式電源(DG)配電網故障性能測試的改進主站注入測試法的平臺組成和工作原理,論述了含DG配電網潮流計算和短路電流計算方法,提出了故障場景自然設置法,根據所設置的故障場景下短路電流的計算結果和繼電保護定值、配電終端定值、自動裝置的設置情況等自動判斷是否應該保護動作跳閘、自動裝置動作、上報相應的故障信息等,可以對健全區域恢復供電過程中的不當操作引發的開關動作或DG和電壓敏感負荷脫網進行模擬,從而更加有效地對配電自動化系統的恢復策略和操作步驟的正確性進行測試檢驗。最后,給出測試實例詳細說明了所論述的測試技術的可行性和有效性。
[Abstract]:This paper discusses the platform composition and working principle of the improved main station injection test method suitable for fault performance test of (DG) distribution network with distributed power supply, and discusses the calculation methods of power flow and short circuit current of distribution network with DG. The natural setting method of fault scene is put forward. According to the calculation results of short circuit current and relay protection value, distribution terminal value, automatic device setting and so on, whether the protection action should be tripped or not should be judged automatically. The automatic device action and the corresponding fault information can be used to simulate the switch action or DG and voltage sensitive load disconnection caused by improper operation in the process of restoring power supply in a sound area. Thus, the correctness of the recovery strategy and operation steps of the distribution automation system is tested and verified more effectively. Finally, a test example is given to illustrate the feasibility and effectiveness of the test technology.
【作者單位】： 國網陜西省電力公司電力科學研究院;
【基金】：國家電網公司科技項目“含分布式電源配電網相間短路和單相接地定位性能測試關鍵技術研究與開發”~~
【分類號】：TM76

【相似文獻】

相關期刊論文 前10條

1 ;日本配電自動化技術的發展與展望[J];農村電氣化;2000年06期

2 趙恂傳,秦仁偉;期望鐵路配電自動化[J];工程設計CAD與智能建筑;2000年05期

3 彭輝,孫，

本文編號：2492434