【摘要】：以電解二氧化錳為錳源,采用球磨法和高溫固相法制備了富鋰錳基正極材料Li_(1.2)Mn_(0.54)Co_(0.13)Ni_(0.13)O_2。探索了燒結溫度對富鋰錳基材料結構和性能的影響,確定了最佳溫度條件。采用X射線衍射和掃描電子顯微鏡對所合成的正極材料進行了結構和形貌表征,同時通過充放電測試對材料電化學性能進行了測試。結果表明,在850℃下,以電解二氧化錳為錳源制備的富鋰錳基正極材料具有較好的電化學性能,在0.05C、0.1C、0.2C、0.5C和1C下的首次放電比容量為254.8、238.1、217.6、179.9和161.8 mAh/g。在0.2C下循環20次,容量保持率為93.66%,在0.5C下循環50次容量保持率為90.03%,在1C下循環100次容量保持率為88.31%。
[Abstract]:Li _ (1.2) mn _ (0.54) Co _ (0.13) Ni _ (0.13) O _ 2 was prepared by ball milling and high temperature solid state method with electrolytic manganese dioxide as manganese source. The effect of sintering temperature on the structure and properties of lithium-rich manganese based materials was investigated and the optimum temperature conditions were determined. The structure and morphology of the synthesized cathode materials were characterized by X-ray diffraction and scanning electron microscopy, and the electrochemical properties of the materials were tested by charge-discharge tests. The results show that the lithium-rich manganese based cathode materials prepared by electrolytic manganese dioxide at 850 鈩，

本文編號：2192298