【摘要】：隨著社會的發展,人們對生活的需求逐步提高,對供電可靠性的要求亦逐步提升,提升供電可靠性,減少用戶停電時間、停電次數,降低線路及設備跳閘率已成為電網企業新的主題。電網設備檢修目前推行狀態檢修,但是狀態檢修獲取設備狀態量仍需對設備進行停電,不符合當前社會對電網企業的新要求,因此,不停電檢測技術獲取設備狀態量的研究就迫在眉睫。變電站內直接對用戶供電產生影響的是各用戶出線間隔的設備檢修,這些出線間隔設備目前基本為開關柜設備,因此,推行不停電檢測技術的設備狀態檢修,首先應完成開關柜設備的不停電檢測狀態檢修研究。本文研討了變電站開關柜設備的不停電檢測的狀態檢修技術,制定了不停電檢測的開關柜狀態檢修的實現策略、實現方式,目前,開關柜不停電檢測的狀態檢修已在國家電網公司內實施,有效的提升了開關柜設備檢修的效率。結合國內不停電技術的發展現狀,本文分析了開關柜設備不停電技術的原理,根據不停電技術的應用效果,分析了不停電檢測手段獲取設備狀態量的方式等,并結合安徽省宿州供電公司應用實例,針對電網企業現行開關柜普遍運行條件,對不停電檢測開關柜狀態檢修技術進行了詳細介紹,對不同開關柜隱患、缺陷的分析、處理進行了全面對分析,進一步指導基于不停電檢測開關柜狀態檢修工作開展。實踐結果證明,本文所研究的開關柜不停電檢測的狀態檢修能有效的提高設備檢修效率,大大降低了用戶設備的停電次數,同時還提升了開關柜設備的運維水平,降低了開關柜設備的故障率。
[Abstract]:With the development of society, people's demand for daily life has been gradually raised, and the demand for power supply reliability has also been raised step by step. The reliability of power supply has been improved, and the time and times of power outages have been reduced. Reducing line and equipment tripping rate has become a new topic for power grid enterprises. Power network equipment maintenance is being implemented at present, but the equipment condition quantity still needs to be cut off, which is not in line with the new requirements of the current society to the power grid enterprises, therefore, it is necessary to obtain the condition quantity of the equipment. It is urgent to obtain the equipment state quantity by non-blackout detection technology. The direct influence on the power supply to the users in the substation is the maintenance of the equipment between the lines of each user, which is basically the switchgear equipment at present. Therefore, the equipment condition maintenance of the non-blackout detection technology is carried out. First of all, should complete the switchgear equipment non-blackout detection condition maintenance research. This paper discusses the condition based maintenance technology of substation switchgear equipment without blackout detection, and formulates the realization strategy and realization mode of condition maintenance of switchgear without blackout detection. The condition maintenance of switchgear without outage detection has been implemented in State Grid Company, which effectively improves the efficiency of switchgear equipment maintenance. Combined with the development of non-blackout technology in China, this paper analyzes the principle of no-blackout technology for switchgear equipment, and analyzes the ways of obtaining the state quantity of equipment by means of non-blackout detection according to the application effect of no-blackout technology. Combined with the application example of Suzhou Power supply Company in Anhui Province, aiming at the prevailing operating conditions of switchgear in power grid enterprises, this paper introduces in detail the condition maintenance technology of non-blackout detection switchgear, and analyzes the hidden dangers and defects of different switchgear cabinets. The comprehensive analysis is carried out to further guide the condition maintenance of switchgear based on non-blackout detection. The practical results show that the condition based maintenance of the switchgear studied in this paper can effectively improve the efficiency of equipment maintenance, greatly reduce the number of outages of user equipment, and at the same time improve the level of operation and maintenance of switchgear equipment. The failure rate of switchgear is reduced.
【學位授予單位】：華北電力大學(北京)
【學位級別】：碩士
【學位授予年份】：2017
【分類號】：TM591

【參考文獻】

相關期刊論文 前10條

1 何勇;;淺談電力設備的故障診斷與狀態檢修[J];中國石油石化;2016年23期

2 魏震;吳一帆;張凡;張琪;李曉華;;輸變電設備在線監測及帶電檢測技術在電網中的應用現狀研究[J];低碳世界;2016年32期

3 楊玉新;王建芳;紀巍;馬小建;秘立鵬;;應用多種帶電檢測技術聯合診斷設備缺陷效果分析[J];內蒙古電力技術;2016年03期

4 黎剛;段肖力;葉會生;何智強;李婷;謝耀恒;;交流金屬封閉開關設備帶電檢測技術綜述[J];湖南電力;2016年02期

5 岳彩鵬;侯憲法;董亞;;TEV與UHF技術在開關柜局部放電檢測中的應用[J];山東電力技術;2016年02期

6 付兆遠;高兆麗;焦方軍;孫巖;蘇娜;;開關柜帶電檢測技術的現場綜合應用研究[J];山東電力技術;2016年01期

7 任雙贊;張默涵;詹世強;劉晶;盧鵬;;帶電檢測技術在電網設備運行維護中的應用[J];南方能源建設;2015年02期

8 敖蕾蕾;王慧芳;杜振東;;電網狀態檢修決策研究[J];機電工程;2014年05期

9 王音音;洪衛華;;變電設備帶電檢測技術的應用探討[J];四川職業技術學院學報;2013年04期

10 胡錫幸;許杰;徐建文;;開關柜局部放電帶電檢測技術的應用分析[J];浙江電力;2013年07期

相關碩士學位論文 前1條

1 魏東亮;10kV開關柜多維度帶電測試技術研究[D];華南理工大學;2013年

，

本文編號：2162807