【摘要】：配電自動化能對配網設備運行情況進行有效監控和管理,而衡量一套配電自動化系統堅強與否的關鍵要看其終端單元的在線率是否達到要求。以DTU離線故障和通信網絡中斷為切入點,采用模塊化控制策略和改進型程序重置技術對DTU內核軟件進行了功能性擴展和二次開發,實現了DTU離線故障的自診斷、自愈以及部分附加功能,從而顯著縮短了DTU離線故障處理時間,大幅減少了終端單元與自動化主站之間數據傳輸?shù)拿c(diǎn)。
[Abstract]:Distribution automation can effectively monitor and manage the operation of distribution network equipment. The key to measure the strength of a distribution automation system depends on whether the on-line rate of the terminal unit meets the requirements. Taking DTU off-line fault and communication network interruption as the breakthrough point, the function extension and secondary development of DTU kernel software are carried out by using modularized control strategy and improved program reset technology, and the self-diagnosis of DTU off-line fault is realized. The self-healing and some additional functions can shorten the processing time of DTU off-line fault and greatly reduce the blind spot of data transmission between terminal unit and automatic master station.
【作者單位】： 國網天津市電力公司濱海供電分公司;
【分類號】：TM76

【相似文獻】

相關期刊論文 前10條

1 ;配電自動化分專委會技術研討會在昆明舉行[J];電網技術;2000年12期

2 ;日本配電自動化技術的發展與展望[J];農村電氣化;2000年06期

3 彭輝,孫，

本文編號：2158102