本文選題：配電網絡 + 可靠性�。� 參考：《南昌大學》2017年碩士論文

【摘要】：保障用戶可靠用電作為配電網絡規劃、建設和運行的核心任務,有明確的指標要求以考核配電網絡供電可靠性,從而指導配電網絡規劃和運行。本文研究內容主要圍繞配電網絡可靠性問題展開,具體體現在可靠性評估算法性能的提升和以開關優化配置為手段的可靠性優化。針對現有可靠性評估算法存在的冗余分析問題,以故障發生后開關類型所關聯動作特性為切入點,結合網絡分區和最小路思想,構建基于開關特性的配電網可靠性等效疊加評估算法:在網絡分區和區域最小路形成過程中將系統元件指標等效疊加于開關元件,得到開關等效可靠性矩陣;將開關元件作為分析對象,以開關等效可靠性矩陣和區域最小路矩陣為媒介,計算可靠性指標。IEEE RBTS Bus 2、4、6系統結果表明所提算法能避免冗余分析,有力提升了計算速度和效率。介于數學解析法對于求解復雜開關優化配置問題的局限和不足,引入含個體相關和成功父代選擇的差分進化算法,以個體相關機制彌補參數設置和變異策略選擇對算法性能的影響,以成功父代選擇克制迭代過程中的尋優停滯。從多個方面對算法的性能進行了測試,算例結果表明算法可行且具有良好的尋優成功率和迭代收斂速度。針對開關優化配置問題中負荷增長導致的等年值法運用受限以及負荷波動問題,構建負荷及單位停電損失多態模型,以規劃年限內總的開關費用和總的停電損失費用為元素,構建考慮負荷增長的多目標開關優化配置模型,在計及系統可靠性約束的同時,考慮單個負荷點對可靠性的要求即用戶可靠性選擇。IEEE RBTS Bus 6系統的F4饋線的開關配置結果驗證了目標函數權重因子、用戶可靠性選擇以及負荷增長對開關優化配置結果的影響。
[Abstract]:As the core task of distribution network planning, construction and operation, it is the core task to ensure the reliable use of electricity for users. There are clear indicators to check the reliability of power supply in distribution network, thus guiding the planning and operation of distribution network. This paper mainly focuses on the reliability of distribution network, which is embodied in the performance improvement of reliability evaluation algorithm and the reliability optimization by means of switch optimal configuration. Aiming at the redundancy analysis problem existing in the existing reliability evaluation algorithms, the characteristics of the operation associated with the switch type after the fault are taken as the breakthrough point, and the network partition and the minimum path are combined with the idea of the network partition and the minimum path. The equivalent superposition evaluation algorithm of distribution network reliability based on switching characteristics is constructed. In the process of network partition and area minimum path formation, the system component index is superimposed on the switch element, and the switch equivalent reliability matrix is obtained. Taking the switch element as the analysis object and taking the switch equivalent reliability matrix and the region minimum path matrix as the media, the results of the IEEE RBTS bus 4N 6 system show that the proposed algorithm can avoid redundant analysis and improve the calculation speed and efficiency. In view of the limitation and deficiency of mathematical analytic method for solving complex switching optimization problem, a differential evolutionary algorithm with individual correlation and successful parent selection is introduced. The individual correlation mechanism is used to compensate for the influence of parameter setting and mutation strategy selection on the performance of the algorithm, and the optimization stagnation in the iterative process of successful parent selection is obtained. The performance of the algorithm is tested from several aspects. The results show that the algorithm is feasible and has a good success rate of optimization and convergence rate of iteration. In view of the problem of load growth and load fluctuation in the optimal allocation of switches, a polymorphic model of load and unit blackout loss is constructed, which takes the total switching cost and total blackout loss cost as the elements. A multi-objective switch optimal configuration model considering load growth is constructed, which takes into account the system reliability constraints at the same time. Considering the reliability requirement of a single load point, that is, the switch configuration of the F4 feeder of IEEE RBTS bus 6 system, the effect of the objective function weight factor, the user reliability selection and the load growth on the switch optimal configuration is verified.
【學位授予單位】：南昌大學
【學位級別】：碩士
【學位授予年份】：2017
【分類號】：TM732

【參考文獻】

相關期刊論文 前10條

1 王艷玲;梁立凱;韓學山;王孟夏;王明強;;計及動態熱定值的配電網可靠性分析[J];中國電機工程學報;2017年05期

2 王主丁;韋婷婷;萬凌云;楊群英;宋偉;張盈;;計及多類開關和容量約束的中壓配電網可靠性估算解析模型[J];電力系統自動化;2016年17期

3 張杰;王曉剛;鄧智杰;李東起;陳國坤;;基于改進網絡等值和故障影響矩陣的復雜配電網可靠性評估[J];中國電力;2016年07期

4 周晶晶;袁越;李振杰;李芙蓉;楊清;包江民;;計及供電可靠性的配電網節點電價計算方法[J];電力系統自動化;2016年07期

5 袁月;王守相;蔣菱;周建華;孫蓉;;適應自愈要求的配電網開關優化配置[J];中國電力;2016年03期

6 胡美玉;胡志堅;汪祥;鄧奧攀;王小飛;;基于雙向?qū)蛹壗Y(jié)構的計及開關故障的配電系統可靠性評估[J];電網技術;2016年05期

7 陳禹;唐巍;陳昕s，

本文編號：2107240