單相逆變電源輸出側RC補償支路的設計
發布時間:2018-07-04 19:04
本文選題:逆變電源 + 電壓紋波 ; 參考:《電力電子技術》2017年10期
【摘要】:針對先進實驗超導托卡馬克(EAST)核聚變裝置上的共振磁擾動(RMP)線圈電源,根據輸出電壓紋波等設計指標,發現其輸出側僅有LC濾波器時,系統會不穩定,通過理論分析結合電路仿真,在輸出側并聯一個RC補償支路,比較不同的RC參數組合,發現在RC補償支路參數合適時,能極大地提高系統穩定性,實驗結果表明電源此時能達到各項設計指標,同時保持穩定運行。
[Abstract]:According to the resonant magnetic disturbance (RMP) coil power of the advanced experimental superconducting Tokamak (EAST) nuclear fusion device, according to the design index of output voltage ripple, it is found that the system will be unstable when the output side is only LC filter. Through theoretical analysis and circuit simulation, a RC compensation branch is parallel in the output side, and the different combination of RC parameters is compared. It is found that the stability of the system can be greatly improved when the parameters of the RC compensation branch are suitable. The experimental results show that the power supply can reach all design indexes at this time and keep stable operation at the same time.
【作者單位】: 中國科學院等離子體物理研究所;中國科學技術大學;
【分類號】:TL631.24;TM464
【相似文獻】
相關期刊論文 前4條
1 于寧;苑海濤;盧曉東;馮仁劍;;單極性SPWM全橋電壓紋波補償[J];電氣傳動;2014年05期
2 林新春;劉方銳;張宇;康勇;;UPS中直流電容電壓紋波分析與抑制[J];電力電子技術;2007年07期
3 張迎新;;有源濾波電路抑制UPS電源BUS電壓紋波技術研究[J];電氣自動化;2012年04期
4 ;[J];;年期
,本文編號:2097061
本文鏈接:http://sikaile.net/kejilunwen/dianlidianqilunwen/2097061.html
最近更新
教材專著