發布時間：2018-06-17 18:25

  本文選題：表面-內置式永磁轉子同步電機(SIPMSM) + 田口法��； 參考：《煤炭學報》2016年12期

【摘要】：針對表面-內置式永磁轉子同步電機(SIPMSM)優化目標多并且彼此之間相互制約的特點,引入一種統計學方法——田口法實現SIPMSM的多目標優化設計。選取齒槽轉矩、電磁轉矩波動、轉矩永磁體質量比和力能指標等特性作為優化目標,并確定了對目標特性影響較大的優化參數和參數影響因子取值范圍。建立參數影響因子和優化目標的實驗正交矩陣,利用有限元法進行求解,分析參數的影響因子對SIPMSM目標性能的影響比重,從而確定使SIPMSM綜合性能最佳的參數組合。通過對比優化前后的目標特性,結果表明優化后SIPMSM的綜合性能得到極大的提高。
[Abstract]:In view of the characteristics of multi-objective optimization and mutual restriction between surface and built-in permanent magnet rotor synchronous motor (SIPMSM), a statistical method-Taguchi method is introduced to realize the multi-objective optimization design of SIPMSM. The characteristics of slot torque, electromagnetic torque ripple, torque permanent magnet mass ratio and force energy index are selected as the optimization objectives, and the optimal parameters and parameters influencing the target characteristics are determined. The experimental orthogonal matrix of parameter influence factor and optimization objective is established, and the finite element method is used to solve the problem. The influence factors of parameters on the performance of SIPMSM are analyzed, and the optimal combination of parameters is determined. By comparing the target characteristics before and after optimization, the results show that the comprehensive performance of the optimized SIPMSM is greatly improved.
【作者單位】： 河南理工大學電氣工程與自動化學院;
【基金】：國家自然科學基金資助項目(U1361109) 2015年度河南省重點科技攻關資助項目(152102210101) 河南理工大學創新團隊資助項目(T2015-2)
【分類號】：TM341
，

本文編號：2032016