考慮環境溫濕度的空冷PEMFC最佳工作溫度研究與控制
本文選題:環境溫濕度 + 空冷PEMFC。 參考:《太陽能學報》2016年06期
【摘要】:空冷型質子交換膜燃料電池(PEMFC)屬于陰極開放式燃料電池,無外部增濕裝置,因此空冷型PEMFC陰極入口處空氣的溫度和濕度必然對燃料電池工作性能有著不可忽視的影響。通過實驗研究空冷型PEMFC最佳工作溫度與環境溫濕度及輸出電流之間的關系,分析不同環境溫濕度和輸出電流對空冷型PEMFC最佳工作溫度的影響。最后設計空冷型PEMFC控制系統,根據得到的不同環境溫濕度下的空冷型PEMFC最佳工作溫度曲線,采用PID控制方法實現不同溫濕度環境條件下的最佳工作溫度控制。
[Abstract]:Air cooled proton exchange membrane fuel cell (PEMFC) is an open cathode fuel cell with no external humidifier. Therefore, the air temperature and humidity at the cathode entrance of air-cooled PEMFC must have an important effect on the performance of the fuel cell. The relationship between the optimum operating temperature of air-cooled PEMFC and ambient temperature and humidity and output current was studied experimentally. The effects of different ambient temperature and output current on the optimal operating temperature of air-cooled PEMFC were analyzed. Finally, the air-cooled PEMFC control system is designed. According to the optimum working temperature curve of air-cooled PEMFC under different ambient temperature and humidity, pid control method is used to realize the optimal working temperature control under different temperature and humidity environment.
【作者單位】: 西南交通大學電氣工程學院;南車株洲電力機車研究所;
【基金】:國家科技支撐計劃(2014BAG08B01) 國家自然科學基金(61473238;51407146) 四川省杰出青年基金(2015JQ0016)
【分類號】:TM911.4
【相似文獻】
相關期刊論文 前10條
1 任遠;曹廣益;朱新堅;;Particle Swarm Optimization based predictive control of Proton Exchange Membrane Fuel Cell (PEMFC)[J];Journal of Zhejiang University Science A(Science in Engineering);2006年03期
2 楊代軍;馬建新;鄔敏忠;徐麟;;城市大氣污染物對PEMFC性能的影響[J];環境科學與技術;2006年04期
3 郝建新;高現文;高鶴明;;基于COMSOL Multiphysics的PEMFC的數值模擬[J];化學工業與工程;2008年05期
4 黃乃寶;梁成浩;郭華;;拋光液對304鋼在模擬PEMFC陽極環境中電化學行為的影響[J];腐蝕科學與防護技術;2009年02期
5 盧明;徐曄;郭濤;劉淵;;人防地下工程PEMFC電站儲氫方案的選擇[J];低溫與特氣;2010年03期
6 ;Dynamic modeling and simulation test of a 60 kW PEMFC generation system[J];Journal of Zhejiang University-Science A(Applied Physics & Engineering);2011年06期
7 黎潤東;宋珂;章桐;;鍵合圖理論在PEMFC建模的應用[J];佳木斯大學學報(自然科學版);2011年04期
8 ;Experimental and numerical studies of micro PEM fuel cell[J];Acta Mechanica Sinica;2011年05期
9 李艷昆;陳維榮;程站立;游志宇;;基于PEMFC分布式發電系統的動態特性分析[J];可再生能源;2011年05期
10 ;Influence of PTFE on Electrode Structure for Performance of PEMFC and 10-Cells Stack[J];Chinese Journal of Mechanical Engineering;2012年06期
相關會議論文 前10條
1 ;Hydrogen supply system for a 200 watt PEMFC[A];2008 International Hydrogen Forum Programme and Abstract[C];2008年
2 ;The current progress of PEMFC cold start models[A];2008 International Hydrogen Forum Programme and Abstract[C];2008年
3 ;Recycling of key materials of membrane electrode assembly for PEMFC by acid oxidation method[A];2008 International Hydrogen Forum Programme and Abstract[C];2008年
4 ;Progress of Guangdong 300KW PEMFC power station[A];2008 International Hydrogen Forum Programme and Abstract[C];2008年
5 ;Effect of Driving Cycle on the performance of PEMFC and microstructure of membrane electrode assembly[A];2008 International Hydrogen Forum Programme and Abstract[C];2008年
6 ;Carbon cloth based on PAN carbon fiber practicability for PEMFC applications[A];2008 International Hydrogen Forum Programme and Abstract[C];2008年
7 ;Experiment of gravity effect on PEMFC[A];2008 International Hydrogen Forum Programme and Abstract[C];2008年
8 ;Rapid Prototyping Bipolar Plate of PEMFC by Gelcasting[A];第七屆全國氫能學術會議論文集[C];2006年
9 ;Rapid Prototyping Bipolar Plate of PEMFC by Gelcasting[A];第七屆全國氫能學術會議專輯[C];2006年
10 ;In-situ production of CO-free hydrogen for PEMFC application by methane catalytic decomposition integrated with Pd membrane hydrogen separation[A];2008 International Hydrogen Forum Programme and Abstract[C];2008年
相關重要報紙文章 前2條
1 中國科學院長春應用化學研究所陸天虹;燃料電池汽車商業化前景看好[N];中國化工報;2002年
2 董釋倫;氫離子交換膜燃料電池前景看好[N];解放日?qǐng)?bào);2001年
相關博士學位論文 前10條
1 王紅星;PEMFC流場與電池性能的模擬研究[D];天津大學;2005年
2 張潔婧;PEMFC電極微觀結構模擬[D];天津大學;2012年
3 彭飛;基于PEMFC的現代有軌電車混合動力系統關鍵技術研究[D];西南交通大學;2014年
4 任遠;質子交換膜燃料電池(PEMFC)的智能建模優化與控制研究[D];上海交通大學;2008年
5 邵玉艷;PEMFC鉑/碳納米管催化劑穩定性和電極制備新方法[D];哈爾濱工業大學;2006年
6 衛國愛;車用PEMFC空氣供給系統建模及控制策略研究[D];武漢理工大學;2010年
7 陳昀;儲氫合金代鉑作為PEMFC和AFC陽極催化材料的電化學過程與電催化特性研究[D];浙江大學;2002年
8 劉宗浩;用于PEMFC的石墨/聚合物復合材料雙極板研究[D];天津大學;2005年
9 駱兵;凝膠注模工藝研究及其在制備PEMFC雙極板中的應用[D];南京理工大學;2007年
10 王樂萍;基于PEMFC的溫差能驅動水下滑翔器能源系統研究[D];天津大學;2012年
相關碩士學位論文 前10條
1 陳冬浩;自增濕空冷型PEMFC特性的實驗分析[D];西南交通大學;2015年
2 張海峰;PEMFC不銹鋼雙極板表面改性碳基薄膜及其特性研究[D];浙江工業大學;2015年
3 王志文;PEMFC堆輸出性能影響分析與膜含水量監測方法研究[D];中國計量學院;2015年
4 趙巍;系統建模與仿真在PEMFC中的應用研究[D];山東大學;2005年
5 張志明;PEMFC系統的建模及其仿真研究[D];上海海事大學;2006年
6 汪小姍;PEMFC最大功率跟蹤研究[D];西南交通大學;2012年
7 張旭;基于分?jǐn)?shù)階微積分的PEMFC建模與控制方法研究[D];南京理工大學;2013年
8 古云蛟;7KW級PEMFC電力變換及控制系統設計[D];上海交通大學;2013年
9 彭峗;空冷自增濕PEMFC電源系統關鍵技術研究[D];西南交通大學;2014年
10 吳魁;用于微型熱電聯產的高溫PEMFC性能研究[D];華南理工大學;2013年
,本文編號:2017691
本文鏈接:http://sikaile.net/kejilunwen/dianlidianqilunwen/2017691.html