本文選題：無線充電 + 電磁感應�。� 參考：《安徽工業大學》2017年碩士論文

【摘要】：隨著電子信息時代的來臨,智能手機變得越來越大眾化,屏幕大且功能多樣化。然而,手機電池的電量成為了消費者關心的一個問題,還有充電時各種各樣繁瑣的數據線。手機接口也是有進水或者進灰塵的風險,所以有必要去研究一種方便可靠性高的充電方法。電磁感應技術可以通過空間上的磁場耦合將電能從發射端傳遞給接收端,然后給手機電池進行充電。本文通過對該技術的結構原理、電路設計、線圈耦合的研究,設計出基于電磁感應原理的手機無線充電系統。首先分析了手機無線充電的理論和結構,包括常見的無線電能傳輸方式,系統的基本框架,對手機充電發射端和接收端進行了介紹。然后,分析了手機電池的特征和充電時影響充電效率的一些因素,并對其中參數進行了分析。最后設計手機充電電路,選出了適合于發射端和接收端的控制芯片,設計了輔助電源,發射端的振蕩電路,對耦合線圈進行了詳細分析,設計出適合手機充電系統的線圈。為了證明系統的性能,結合實驗室的條件,搭建了一個手機無線充電的實驗系統。在介紹了一些關于測試的方法之后,對發射端和接收端的模塊進行了一系列的指標測試,從而驗證了系統的可行性,本文所研究的內容對手機無線充電的推廣有著促進的作用,可以為以后手機無線充電設計研究提供一些參考。最后,展望無線充電的發展前景,并對本文的重要內容進行總結。
[Abstract]:With the advent of the electronic information age, smart phones are becoming more and more popular, with large screens and diversified functions. However, cell phone battery power has become a concern for consumers, as well as a variety of rechargeable data lines. Mobile phone interface is also a risk of water or dust, so it is necessary to study a convenient and reliable charging method. Electromagnetic induction technology can transmit electric energy from the transmitter to the receiver through magnetic field coupling in space, and then charge the cell phone battery. In this paper, a wireless charging system based on electromagnetic induction is designed by studying the structure principle, circuit design and coil coupling of the technology. Firstly, the theory and structure of mobile phone wireless charging are analyzed, including the common radio energy transmission mode, the basic framework of the system, and the introduction of the mobile phone charging transmitter and receiver. Then, the characteristics of mobile phone battery and some factors affecting charging efficiency are analyzed, and the parameters are analyzed. Finally, the mobile phone charging circuit is designed, the control chip suitable for the transmitter and receiver is selected, the auxiliary power supply and the oscillation circuit of the transmitter are designed, the coupling coil is analyzed in detail, and the coil suitable for the mobile phone charging system is designed. In order to prove the performance of the system, an experimental system for wireless charging of mobile phone is built according to the conditions of the laboratory. After introducing some testing methods, a series of index tests on the modules of the transmitter and receiver are carried out to verify the feasibility of the system. The contents studied in this paper can promote the promotion of wireless charging of mobile phones. Can provide some reference for the future mobile phone wireless charging design research. Finally, the development prospect of wireless charging is prospected, and the important contents of this paper are summarized.
【學位授予單位】：安徽工業大學
【學位級別】：碩士
【學位授予年份】：2017
【分類號】：TM910.6

【參考文獻】

相關期刊論文 前10條

1 倪國旗;王麗娜;彭欣;;一種無線充電系統的設計[J];信息化研究;2013年03期

2 胡繼勝;李福林;;一種非接觸式供電系統設計[J];電測與儀表;2011年03期

3 謝利濤;趙志強;王彥莉;;無線充電技術及其應用[J];河南科技;2011年05期

4 彭琦;劉群興;葉q，

本文編號：1963428