本文選題：光伏發電 + 光電建筑��； 參考：《湖北工業大學》2017年碩士論文

【摘要】：隨著光伏發電技術發展,其應用范圍不斷擴大,因光伏發電主要依靠通過光伏組件接收太陽光能產生綠色電力,其使用環境受到安裝面積和周圍環境的限制,為充分利用太陽能資源,把光伏發電系統應用到建筑物的表面是光伏發電應用中一個重要方式,在常規能源短缺,環境不斷惡化的今天,推進光伏發電技術在建筑上的應用是我國大力發展新能源,優化能源結構作出的正確選擇,但光伏發電與建筑結合應用在目前的實踐中,仍存在設計、技術、科研、推廣等多方面問題。本文以國家級示范工程蚌埠市三館一院3.43MW光電建筑一體化示范工程為實例,就光電發電系統在建筑上應用項目的設計,對具有發電功能的建材型構件的設計開發,建筑不同側面對光伏發電系統發電能力的影響以及如何保持建筑自有風格等方面進行探討和研究。通過對光伏發電原理,光伏組件種類和特性及逆變器等設備的特性進行介紹和分析,通過優化設計方案實現光伏發電系統與建筑物實現一體化,達到完美結合。本文通過設計實例論述光電建筑一體化項目中對于光伏發電設備的選型和設計的特殊要求,設計了建材型光伏組件應用到項目中,根據具體建筑情況優化了設計方案,通過對運營過程中發電量分析對比各種方案利弊。利用項目采用的新技術新方法和最終取得的效果,以推動相關技術的應用范圍。項目設計展示光伏發電系統與建筑完美結合,研究符合我國光伏發電推廣應用方向,也是發展循環經濟模式,建設和諧社會的具體體現,對推進太陽能利用及光伏發電產業的發展進程具有重大的意義。
[Abstract]:With the development of photovoltaic power generation technology, its application scope is expanding, because photovoltaic power generation mainly depends on photovoltaic module to receive solar light energy to produce green power, and its use environment is limited by installation area and surrounding environment. In order to make full use of solar energy resources and apply photovoltaic power generation system to the surface of buildings, it is an important way to apply photovoltaic power generation system to the application of photovoltaic power generation. Today, with the shortage of conventional energy sources and the deteriorating environment, To promote the application of photovoltaic power generation technology in architecture is the correct choice for our country to develop new energy and optimize energy structure. However, the combination of photovoltaic power generation and building in the current practice still exists in design, technology and scientific research. Generalizations and other problems. In this paper, taking the demonstration project of 3.43MW optoelectronic building integration of the National demonstration Project of Bengbu Sanguan and first Hospital as an example, the design and development of building materials components with power generation function are made on the basis of the design of the application project of photoelectric power generation system in buildings. The influence of different aspects of building on the power generation capacity of photovoltaic system and how to maintain its own style are discussed and studied. Through the introduction and analysis of the principle of photovoltaic power generation, the types and characteristics of photovoltaic modules and the characteristics of inverters and other equipment, the integration of photovoltaic power generation system and buildings is realized through the optimization design scheme, and the perfect combination is achieved. This paper discusses the special requirements for the selection and design of photovoltaic equipment in the integrated photovoltaic construction project through the design example, designs the building materials photovoltaic module to be applied to the project, and optimizes the design scheme according to the concrete building conditions. Through the operation of electricity generation analysis and comparison of the pros and cons of various schemes. Make use of the new technologies and methods adopted by the project and the final results to promote the application of related technologies. The project design shows the perfect combination of photovoltaic power generation system and building, the research conforms to the application direction of photovoltaic power generation in our country, and it is also the concrete embodiment of developing circular economy model and building harmonious society. It is of great significance to promote the utilization of solar energy and the development of photovoltaic power generation industry.
【學位授予單位】：湖北工業大學
【學位級別】：碩士
【學位授予年份】：2017
【分類號】：TM615;TU201

【參考文獻】

相關期刊論文 前10條

1 趙思真;張麗瑩;胡文俊;胡長冬;;光伏建筑一體化中光伏組件安裝方式的影響[J];電力與能源;2015年01期

2 柯紅峰;;高校光伏建筑一體化的應用探析[J];江西建材;2014年24期

3 王曉丹;羅多;余國保;陳征;;真空玻璃光伏構件的設計與制造[J];新材料產業;2014年12期

4 齊舒;;真空玻璃平板光伏構件光學物理性能檢測與應用[J];福建建設科技;2014年03期

5 侯玉芝;許海鳳;唐健正;;光伏真空玻璃在建筑一體化上的應用與探討[J];綠色建筑;2012年06期

6 龍文志;;光電屋頂結構設計[J];建筑節能;2012年06期

7 李春曦;王佳;葉學民;喻橋;;我國新能源發展現狀及前景[J];電力科學與工程;2012年04期

8 朱晉偉;孫江濤;;中國光伏行業發展中的新問題及對策[J];企業經濟;2012年03期

9 馮江濤;馮皓;揭敢新;;光伏建筑一體化組件安全可靠性與檢測認證[J];電源技術;2012年03期

10 代倩;段善旭;蔡濤;陳昌松;陳正洪;邱純;;基于天氣類型聚類識別的光伏系統短期無輻照度發電預測模型研究[J];中國電機工程學報;2011年34期

，

本文編號：1914736