本文選題：LED驅動電源 + 功率因數校正�。� 參考：《南京師范大學》2017年碩士論文

【摘要】：LED被稱為第四代綠色照明光源,憑借耗電量小、發光效率高、使用壽命長、安全可靠等優點,已經逐步取代傳統照明,在眾多領域得到廣泛應用。目前LED驅動電源存在效率低、輸出電流不穩定等問題,縮短了 LED光源壽命,嚴重影響了 LED照明的發展。此外,為了響應現代照明節能環保的號召,如果能夠?qū)崿F(xiàn)LED智能調光,不僅可以節能,還能延長LED的使用壽命。根據LED驅動電源設計要求,論文設計了一款具有有源功率因數校正電路(APFC)和正激電路兩級結構并且?guī)д{(diào)光功能的LED驅動電源。1.對LED的特性、原理、參數,功率因數校正技術和DC/DC電路拓?fù)浣Y(jié)構進行分析,根據設計需求和設計指標,確定了 LED驅動電源系統設計結構。2.考慮實際應用,設計了輸入保護電路、電磁干擾濾波器(EMI)和散熱裝置,提高了驅動電源的安全性和可靠性;為了提高功率因數和效率,采用ICE3PCS03G主控芯片設計了升壓式有源功率因數校正電路和采用芯片NCP1252設計了正激恒壓輸出電路;分別采用三端集成穩壓器LM7809和LED恒流驅動專用芯片LM3404HV設計了 LED恒流驅動電路。3.在研究調光原理的基礎上,設計了基于ATmega128單片機的LED調光控制系統,完成了 ATmega128最小系統、溫度采集模塊、光照采集模塊以及人體紅外監測模塊設計。4.制作LED驅動電源,并對LED驅動電源主要性能參數進行測試,功率因數在0.95以上,效率在85%以上,功率因數和效率有較大提高。在實驗室現有條件下,通過ATmega128單片機進行LED照明調光測試,測試結果表明LED驅動電源穩定工作,LED調光效果較好。
[Abstract]:LED is known as the fourth generation green lighting source. With the advantages of low power consumption, high luminous efficiency, long service life, safety and reliability, LED has gradually replaced traditional lighting and has been widely used in many fields. At present, the low efficiency and unstable output current of LED drive power supply shorten the life of LED light source and seriously affect the development of LED lighting. In addition, in order to respond to the call of modern lighting energy saving and environmental protection, if we can realize the intelligent dimming of LED, we can not only save energy, but also prolong the service life of LED. According to the design requirements of LED driving power supply, this paper designs a LED driver power supply with active power factor correction circuit (APFC) and forward circuit with the function of dimming. The characteristics, principle, parameters, power factor correction technology and DC/DC circuit topology of LED are analyzed. According to the design requirements and design specifications, the design structure of LED drive power supply system is determined. Considering the practical application, the input protection circuit, electromagnetic interference filter (EMI) and heat dissipation device are designed to improve the safety and reliability of the driving power supply, in order to improve the power factor and efficiency, The boost active power factor correction circuit and the forward constant voltage output circuit are designed by using the ICE3PCS03G main control chip and the chip NCP1252, respectively, and the LED constant current drive circuit is designed by the three-terminal integrated voltage regulator LM7809 and the LED constant current drive special chip LM3404HV. Based on the study of dimming principle, the LED dimming control system based on ATmega128 microcontroller is designed. The design of ATmega128 minimum system, temperature acquisition module, illumination acquisition module and infrared monitoring module of human body is completed. The main performance parameters of LED drive power supply are tested. The power factor is above 0.95, the efficiency is more than 85%, and the power factor and efficiency are improved greatly. Under the existing conditions of the laboratory, the LED lighting dimming test is carried out by ATmega128 single chip computer. The test results show that the LED driving power supply works stably and the dimming effect of LED is better.
【學位授予單位】：南京師范大學
【學位級別】：碩士
【學位授予年份】：2017
【分類號】：TM923.34

【相似文獻】

相關期刊論文 前10條

1 ;驅動電源成LED產業生死成敗之關鍵[J];電源世界;2008年10期

2 沙占友;王彥朋;;大功率LED驅動電源設計要點[J];電源技術應用;2011年02期

3 羅富德;兩種保護直流電器的節電驅動電源[J];機床電器;1994年05期

4 張琪;;一款高效大功率LED驅動電源設計[J];中國照明電器;2013年03期

5 陳俊;徐志偉;陳杰;;壓電驅動器驅動電源設計[J];國外電子測量技術;2014年04期

6 楊大洪;;高速電機驅動電源[J];電子工藝技術;1989年06期

7 于月森;戚文艷;伍小杰;;本安型大功率LED驅動電源設計與研究[J];煤炭科學技術;2013年01期

8 周俊生;朱惠宗;孔鎮;馮金垣;湯華權;;一種大功率LED照明驅動電源的設計與研究[J];電子產品世界;2014年Z1期

9 ;電光Q開關驅動電源介紹[J];爆炸與沖擊;2005年06期

10 ;《LED照明與顯示技術叢書LED照明驅動電源優化設計》[J];電源技術應用;2011年04期

相關會議論文 前10條

1 繆復華;林宣霈;宋福生;;高效率LED照明驅動電源裝置之研究[A];海峽兩岸第十五屆照明科技與營銷研討會專題報告暨論文集[C];2008年

2 鄭旭峰;王沐;;LD驅動電源遠程控制的設計和實現[A];中國工程物理研究院科技年報（2005）[C];2005年

3 林方盛;蔣曉波;江磊;劉木清;;LED驅動電源綜述[A];中國照明工程二十年�？痆C];2012年

4 馬勛;任青毅;曹科峰;;激光二極管驅動電源的控制系統設計[A];中國儀器儀表學會第十一屆青年學術會議論文集[C];2009年

5 王蓓蓓;阮新波;徐明;楊飛;;新型長壽命大功率LED驅動技術的研究[A];2008中國電工技術學會電力電子學會第十一屆學術年會論文摘要集[C];2008年

6 顧國林;;光纖傳感用大功率脈沖光源驅動電源低功耗設計[A];第十四屆全國光學測試學術討論會論文（摘要集）[C];2012年

7 唐國慶;;LED驅動照明變革的關鍵要素[A];第十二屆全國LED產業研討與學術會議論文集[C];2010年

8 謝R菸，

本文編號：1888080