本文選題：布雷頓循環 + 監控裝置　； 參考：《中國艦船研究院》2017年碩士論文

【摘要】：高效燃燒室是布雷頓循環閉式燃氣輪機發電裝置的熱源部分。研究該燃燒室監控裝置的目的:一是對高效燃燒室運行狀態的控制規律進行研究;二是為研究整個布雷頓循環發電裝置監控系統建立基礎。監控系統采用嵌入式控制的設計方案,系統具有體積小、重量輕等特點。研究內容包括:高效燃燒室監控系統的總體設計;以嵌入式FPGA控制器為核心搭建硬件平臺,并設計了包括4-20mA信號處理電路、溫度信號處理電路、脈沖信號處理電路和開關量信號處理電路等;FPGA控制器的軟件采用LabVIEW語言進行開發,包括了數據采集和實時控制程序的設計,并同時采用Lab VIEW對上位機軟件進行設計。研究成果包括一套以嵌入式控制器為核心的監控裝置硬件設備,一套高效燃燒室系統監控軟件和一套上位機監測軟件。最后進行了高效燃燒室監控裝置的配機試驗。試驗結果表明:該監控系統具有良好的控制效果,能確保高效燃燒室正常工作并滿足其性能要求。
[Abstract]:The efficient combustion chamber is the heat source of the closed gas turbine. The purpose of the research is as follows: first, the control law of the high efficiency combustor is studied, and the second is the foundation for the study of the monitoring system of the whole Brayton cycle power plant. The monitoring system adopts the design of embedded control. The system has the characteristics of small volume and light weight. The research contents include: the overall design of high-efficiency combustion chamber monitoring system, the hardware platform based on embedded FPGA controller, and the design of 4-20mA signal processing circuit, temperature signal processing circuit, The software of pulse signal processing circuit and switch signal processing circuit is developed by LabVIEW language, including the design of data acquisition and real-time control program. At the same time, the software of upper computer is designed by Lab VIEW. The research results include a set of hardware equipment with embedded controller as the core, a set of high-efficiency combustion chamber system monitoring software and a set of host computer monitoring software. Finally, the matching test of high efficiency combustion chamber monitoring device is carried out. The experimental results show that the monitoring system has good control effect and can ensure the high efficiency combustor to work normally and meet its performance requirements.
【學位授予單位】：中國艦船研究院
【學位級別】：碩士
【學位授予年份】：2017
【分類號】：TP277;TM314

【參考文獻】

相關期刊論文 前10條

1 趙旭;貴忠東;范杰;;基于嵌入式控制器的船舶主推進控制系統設計[J];船舶工程;2015年S1期

2 王磊;何晉秋;;基于通用化的船舶監控裝置設計[J];艦船電子工程;2015年01期

3 王樹東;孫野;梁國棟;;基于LabVIEW和FPGA在數據采集系統中的開發設計[J];自動化與儀器儀表;2014年06期

4 黃彥平;王俊峰;;超臨界二氧化碳在核反應堆系統中的應用[J];核動力工程;2012年03期

5 劉葉紅;王國治;;基于現場總線的船舶柴油機嵌入式監控技術[J];中外船舶科技;2008年01期

6 俞梅;孫娜;唐明新;;基于LabVIEW DSC的監控軟件的應用研究[J];微計算機信息;2007年07期

7 何瑋瑋;張維競;劉曉偉;張小卿;;嵌入式系統在船舶監控系統中的應用研究[J];造船技術;2007年01期

8 羊劍 ,鄭華耀;應用于船舶電力推進系統的嵌入式仿真平臺[J];上海造船;2005年01期

9 陳智君,常勇;嵌入式柴油機工作狀態監測裝置設計[J];武漢理工大學學報;2004年11期

10 孟松,徐慧樸;追蹤船舶自動化發展趨勢 加強嵌入式系統教學[J];航海教育研究;2003年04期

相關碩士學位論文 前6條

1 龔Z，

本文編號：1857377