本文選題：動態拉桿 + 變截面桿�。� 參考：《核動力工程》2017年05期

【摘要】：針對變截面桿的受壓臨界載荷確定,本文嘗試使用一種快速有效的理論計算方法進行校核,以滿足工程應用。該方法使用矩陣傳遞法進行了理論計算,并使用ANSYS軟件和規范KTA3205分別進行了有限元計算和試驗驗證。結合制造工藝及計算簡化處理方法對計算結果進行差異性分析,驗證了理論計算方法的合理性和可用性。
[Abstract]:In view of the determination of the compressive critical load of the variable cross section bar, this paper attempts to use a fast and effective theoretical calculation method to check it in order to satisfy the engineering application. In this method, the matrix transfer method is used to carry out the theoretical calculation, and the finite element calculation and experimental verification are carried out by using ANSYS software and standard KTA3205, respectively. The rationality and availability of the theoretical calculation method are verified by analyzing the difference of the calculation results with the manufacturing process and the simplified calculation method.
【作者單位】： 深圳中廣核工程設計有限公司;
【分類號】：TM623
，

本文編號：1836703