基于聚類分析的三階段二級電壓控制分區方法
本文選題:無功源 + 聚類分析; 參考:《電力系統自動化》2016年05期
【摘要】:合理的電壓控制分區是三級或"軟"三級電壓控制模式應用的基礎,好的分區結果應保證每個分區中都含有無功源,且分區內保持連通性。文中提出一種基于網絡結構及電氣距離的電壓控制分區方法:首先根據網絡結構將由輻射狀支路連接在一起的無功源并入同一個分區;其次對受控點進行分類處理,在保證分區連通性的基礎上將受控點并入電氣距離最近的無功源所屬分區;最后基于WARD距離對初始分區進行聚類分析,最終確定分區方案。分區聚類僅在有支路連接的相鄰分區之間進行,保證了分區結果的連通性,并大大減小了分區聚類的計算量。所述分區方法僅與電網結構及參數有關,與電網的潮流分布無關,能夠較好地滿足二級電壓控制的需要。對IEEE 39節點測試系統及實際電力系統的分區劃分結果驗證了所述方法的合理性及效率,對實際電力系統二級電壓控制具有一定的應用價值。
[Abstract]:A reasonable voltage control partition is the basis for the application of the three-level or "soft" three-level voltage control mode. Good partition results should ensure that each partition contains reactive power sources and maintains connectivity within the partition. In this paper, a voltage control partitioning method based on network structure and electrical distance is proposed: firstly, reactive power sources connected by radiating branches are merged into the same partition according to the network structure; secondly, the controlled points are classified and processed. Based on the partition connectivity, the controlled points are merged into the nearest reactive power source partition, and the initial partition is analyzed based on the WARD distance, and the partition scheme is finally determined. The partitioning clustering is only carried out between adjacent partitions with branch connections, which ensures the connectivity of partition results and greatly reduces the computational complexity of partitioned clustering. The zoning method is only related to the structure and parameters of the power network and is independent of the power flow distribution of the power network, and can meet the needs of the two-stage voltage control. The partition results of IEEE 39-bus test system and actual power system verify the rationality and efficiency of the method, and have certain application value to the practical power system two-stage voltage control.
【作者單位】: 浙江大學電氣工程學院;云南電力調度控制中心;國網冀北電力有限公司電力科學研究院;
【基金】:國家科技支撐計劃資助項目(2013BAA01B02)~~
【分類號】:TM921.5
【相似文獻】
相關期刊論文 前10條
1 郭慶來;張伯明;孫宏斌;吳文傳;;電網無功電壓控制模式的演化分析[J];清華大學學報(自然科學版);2008年01期
2 華梁;;淺談電力系統二級電壓控制的研究現狀及不足[J];科學之友;2011年06期
3 劉志會;;多功能電壓控制線路[J];電工技術;1989年08期
4 童力松;;電壓控制移相電路[J];航空精密制造技術;1991年01期
5 吳冀湘;涂光瑜;羅毅;;基于模糊模式識別的分布式電壓控制實時分區算法[J];電力系統自動化;2006年03期
6 許碧峰;郭偉;;協調二級電壓控制的研究[J];浙江電力;2006年02期
7 方鴿飛;劉君華;呂巖巖;;基于樹形分布的電壓控制分區[J];電力系統及其自動化學報;2007年01期
8 王彬;郭慶來;孫宏斌;張伯明;李海峰;羅建裕;;雙向互動的省地協調電壓控制[J];電力系統自動化;2010年12期
9 劉利;;電網二級電壓控制的現狀分析和發展方向[J];科技傳播;2010年19期
10 盧志剛;秦四娟;常磊;馬麗葉;;基于Dempster-Shafer證據理論的無功/電壓控制分區[J];電網技術;2010年10期
相關會議論文 前4條
1 趙洪菊;葉鵬;曾林鎖;孫峰;;電力系統最優二級電壓控制[A];第十一屆全國電工數學學術年會論文集[C];2007年
2 趙洪菊;葉鵬;曾林鎖;孫蜂;;電力系統二級電壓控制研究綜述[A];第一屆電器裝備及其智能化學術會議論文集[C];2007年
3 嚴永新;;云南電網無功及電壓控制策略構想[A];2006年云南電力技術論壇優秀論文集[C];2006年
4 謝浩南;劉明波;;最優協調電壓控制直接Radau排列算法[A];中國高等學校電力系統及其自動化專業第二十四屆學術年會論文集(上冊)[C];2008年
相關重要報紙文章 前1條
1 江蘇 孫振華;看元件選板卡(三)[N];電腦報;2002年
相關博士學位論文 前8條
1 劉水平;基于軌跡靈敏度技術的電力系統模型預測緊急電壓控制研究[D];華南理工大學;2012年
2 鄭文杰;最優協調電壓控制的直接動態優化算法研究[D];華南理工大學;2010年
3 ,
本文編號:1805784
本文鏈接:http://sikaile.net/kejilunwen/dianlidianqilunwen/1805784.html