本文選題：電池儲能系統　切入點：模塊化多電平變換器　出處：《電工技術學報》2017年17期

【摘要】：將模塊化多電平變換器作為電池儲能裝置的并網變換器,可在平抑新能源輸出功率波動的同時實現儲能裝置的直接并網,降低了系統成本。對于大規模電池儲能裝置而言,如何延長其使用壽命一直是學術界和工業界的研究熱點�；诖�,提出了一種適用于儲能型模塊化多電平系統的多時間尺度控制方法。根據不同的時間尺度劃分,可將整體控制分為三層,并為每層控制設定了各自的控制目標。在該控制方式下,僅需估算每個電池組的相對健康程度,即可確定各子模塊的輸出功率,進而改善電池組的健康狀況,使其趨于一致,延長儲能系統的使用壽命。最后通過Matlab仿真和實驗驗證了該控制方法的有效性和可行性。
[Abstract]:The grid connected converter of modular multilevel converter for battery energy storage devices, can be directly connected to the energy storage device in the new energy to stabilize the fluctuation of output power at the same time, reduce the cost of the system. For the large scale battery energy storage device, how to prolong the service life of a straight is a hot research topic in academia and Industry Based on this, a method is presented for the storage of multiple time scale type modular multilevel control system. According to the different time scales, the overall control is divided into three layers, and each layer of control set control objectives respectively. In the control mode, only a relatively healthy degree estimates for each battery, you can determine the output power of each module, and then improve battery health, make it consistent, prolong the service life of the energy storage system. Finally, through Matlab simulation and experimental verification of the The effectiveness and feasibility of the control method.

【作者單位】： 山東大學電網智能化調度與控制教育部重點實驗室;
【分類號】：TM46

【相似文獻】

相關期刊論文 前10條

1 唐伏良,莊朝暉,熊有倫;一類新型的多電平逆變拓?fù)溲芯縖J];中國電機工程學報;2000年12期

2 白路;史U，

本文編號：1681490