本文關鍵詞：AgSn合金壓坯氧化燒結一體化工藝研究　出處：《稀有金屬材料與工程》2017年04期 　論文類型：期刊論文

  更多相關文章： AgSn 氧化燒結一體化 電觸頭材料

【摘要】：就AgSn合金壓坯氧化燒結一體化工藝進行探究。通過XRD和SEM等手段對制得的AgSn合金粉末進行表征,系統考察了氧化溫度、氧化時間、成型壓力、燒結溫度和燒結時間對AgSn合金壓坯氧化率、相對密度和抗彎強度的影響。確定了較適宜的氧化溫度和時間為700℃和2 h,較適宜的燒結溫度和時間為900℃和3 h,較適宜的壓坯壓力為250 MPa。結果表明:AgSn合金壓坯氧化燒結一體化工藝不但能夠簡化傳統粉末冶金工藝流程,提高生產效率,并且能夠提高粉末的燒結活性。
[Abstract]:The integrated process of oxidation and sintering of AgSn alloy billet was studied. The prepared AgSn alloy powder was characterized by XRD and SEM. The oxidation temperature and oxidation time were systematically investigated. The effects of molding pressure, sintering temperature and sintering time on the oxidation rate, relative density and bending strength of AgSn alloy billet were investigated. The optimum oxidation temperature and time were determined to be 700 鈩，

本文編號：1440697