本文關鍵詞：配電網電容電流超標問題研究　出處：《電力系統保護與控制》2017年21期 　論文類型：期刊論文

  更多相關文章： 配電網 變電站 電容電流 補償 仿真

【摘要】：為了準確有效地解決當前配電網電容電流超標問題,針對10 k V不接地系統,提出一種分散固定和集中跟蹤相結合的無功補償方法。利用數據實例和數理統計方法分析了當前運行配電網電容電流與常規無功補償?shù)膯栴},并給出分散固定與集中跟蹤解決方案。利用Matlab/Simulink對該方案進行仿真校驗。仿真結果表明,分散固定補償與集中跟蹤補償相結合的方法對治理10 k V不接地系統電容電流超標問題是有效和實用的。同時,該方案對規劃設計中的變電站和10 k V開閉所在無功配置方面具有一定的指導意義。
[Abstract]:In order to solve the problem of capacitive current exceeding the current standard accurately and effectively, a 10kV ungrounded system is proposed. This paper presents a method of reactive power compensation based on decentralized fixation and centralized tracking. The problems of capacitive current compensation and conventional reactive power compensation in current distribution network are analyzed by using data examples and mathematical statistics. The solution of distributed fixation and centralized tracking is given. The simulation results show that the scheme is verified by Matlab/Simulink. The combination of decentralized fixed compensation and centralized tracking compensation is effective and practical to solve the problem of capacitive current exceeding the standard of 10 kV ungrounded system. This scheme has certain guiding significance for substation in planning and design and reactive power configuration of 10 kV on and off.
【作者單位】： 河南省電力公司新鄉供電公司;
【基金】：基金項目 本文已申請專利(ZL 201610509284.6[P])
【分類號】：TM714.3;TM727
【正文快照】： 隨著城區配電網電纜線路所占的比重越來越大,變電站電容電流也將越來越大[1]。由于消弧線圈增容不及時,部分變電站消弧線圈容量嚴重不足,給城市配電網的安全運行帶來隱患。因此,準確地得出系統的電容電流,并根據此數據投入相應的消弧線圈以補償系統的電容電流[2],是本文研究的

【相似文獻】

相關期刊論文 前10條

1 朱U，

本文編號：1437822