本文關鍵詞：變電站自動化通信網絡的研究與設計　出處：《山東大學》2017年碩士論文　論文類型：學位論文

  更多相關文章： 變電站 自動化 通信網絡 設計與仿真

【摘要】：在電網的安全運行當中,變電站的自動化系統的發展為其經濟、安全發揮出了重要的作用,隨著信息化進程不斷加快,電網的結構相應的變得復雜許多,而且需要傳達的信息量也變得更加的龐大,因此,對于變電站信息化系統的網絡要求進一步提高�；谶@種形式,構架出一套能夠完整的實現信息標準化以及設備操作便利化的通信網絡至關重要。本文研究的主要內容為變電站自動化通信網絡的研究與設計,第一部分為緒論,對研究背景及意義、國內外研究現狀、研究主要內容等進行詳細的介紹,以此豐富本篇論文的理論基礎;第二部分為變電站自動化通信網絡基礎概述,從變電站自動化系統、變電站自動化、變電站綜合自動化的網絡結構、IEC61850標準技術特點、基于IEC61850的變電站自動化系統通信網絡、網絡化、過程層網絡化、以及統一通信網絡等相關概念進行概述,以便于更好的理解這些基礎性概念;第三章為變電站自動化通信協議及模型構建,對變電站自動化通信網絡的特征要求、變電站自動化通信功能等進行介紹,其次對IEC61850標準實現過程、功能建模過程、數據建模、通信服務映射、網絡負載的建模、周期性信息的建模、突發性信息的建模、文件傳輸型信息等進行建模,并進行一致性測試;第四章論述了變電站實現自動化通信網絡設計的相關理念,先描述變電站組網方案設計、組網設備選型及要求、變電站組網圖,其次對變電站自動化通信網絡拓?fù)浣Y(jié)構進行設計,從全站唯一網絡、兩層獨立網絡等方式來描述變電站自動化通信網絡組網方式;第五章節為變電站自動化通信網絡仿真分析,首先對仿真軟件進行介紹,對過程層網絡、統一通信網絡進行仿真分析,最后對仿真結果予以描述,第六部分是對全文進行高度概括,并進行展望。本文根據IEC61850中涉及的分層次的思想,給出變電站自動化通信網絡的全站唯一網絡組網方式和兩層獨立網絡組網方式,徹底解決變電站通信方式和數據結構不統一、內部信息共享困難、設備間互操作性差、數據利用率低等問題,變電站自動化系統數據通信的實時性得到有效保證,進一步擴大了變電站通信網絡的發展空間。
[Abstract]:In the safe operation of the power grid, the development of substation automation system for its economy, security plays an important role, with the acceleration of the information process, the structure of the grid has become much more complex. And the amount of information needs to be conveyed has become more huge, therefore, the network requirements for substation information systems are further improved. Based on this form. It is very important to construct a set of communication network which can realize information standardization and equipment operation facilitation. The main content of this paper is the research and design of substation automation communication network. The first part is the introduction, to the research background and significance, the domestic and foreign research present situation, the research main content and so on carries on the detailed introduction, in order to enrich this paper the theory foundation; The second part is the basic overview of substation automation communication network, from the substation automation system, substation automation, substation integrated automation network structure IEC61850 standard technical characteristics. The communication network, network, process layer network and unified communication network of substation automation system based on IEC61850 are summarized in order to better understand these basic concepts. The third chapter is the construction of substation automation communication protocol and model. The characteristic requirements of substation automation communication network and substation automation communication function are introduced. Secondly, the IEC61850 standard implementation process, function modeling process, data modeling, communication service mapping, network load modeling, periodic information modeling, burst information modeling. Modeling and conformance testing of file transfer information; Chapter 4th describes the related concepts of substation automation communication network design, first describes the substation networking scheme design, networking equipment selection and requirements, substation network diagram. Secondly, the topology of substation automation communication network is designed to describe the substation automation communication network network from the only network of the whole station and the two-layer independent network. Chapter 5th is the simulation analysis of substation automation communication network. Firstly, the simulation software is introduced, and the process layer network and unified communication network are simulated and analyzed. Finally, the simulation results are described. Part 6th is the full text of the highly summarized, and prospects. This paper according to the IEC61850 involved in the idea of hierarchy. This paper presents the substation automation communication network networking mode of the whole station unique network and two-layer independent network, thoroughly solve the substation communication mode and data structure is not unified, internal information sharing difficulties. The problems of poor interoperability among devices and low data utilization ratio ensure the real-time performance of data communication in substation automation system effectively and further expand the development space of substation communication network.
【學位授予單位】：山東大學
【學位級別】：碩士
【學位授予年份】：2017
【分類號】：TM63

【相似文獻】

相關期刊論文 前10條

1 ;變電站設備即插即用技術[J];福建電力與電工;2000年03期

2 付功連;;淺談變電站設備改造思路和設計優化[J];邵陽學院學報(自然科學版);2006年03期

3 秦繼先;;變電站設備相關問題探討[J];科技風;2011年11期

4 鮑輝;;淺談智能變電站的優點及運行維護[J];中國新技術新產品;2013年13期

5 鄭建棟;;試析變電站智能設備應用狀況[J];電子測試;2013年07期

6 牟世超;路興平;;變電站設備改造思路及設計優化方案探究[J];電子制作;2013年16期

7 王彬;;關于優化變電站設備改造的有益探索[J];中國新技術新產品;2013年23期

8 徐偉江;;關于220kV智能變電站的運行管理探討[J];現代制造技術與裝備;2013年06期

9 王錫生;500kV變電站應用圖像監控系統的探討[J];華東電力;2001年12期

10 張偉;變電站的干擾及其防護措施[J];自動化博覽;2002年05期

相關會議論文 前10條

1 沈光友;;雪凝期間變電站的特殊運行維護[A];2008年抗冰保電技術論壇論文集（二）[C];2008年

2 王保娟;姚松恒;;基于H．263的變電站遠程視頻監控系統研究[A];第十屆中國科協年會環境保護與生態文明建設論壇論文集[C];2008年

3 柴華;;變電站和諧建設探討[A];城市時代，協同規劃——2013中國城市規劃年會論文集（05-工程防災規劃）[C];2013年

4 肖承;倉世奎;張真濤;;變電站鳥害故障分析和預防措施[A];經濟策論（下）[C];2011年

5 羊劍梅;;變電站現場作業風險分析與管控[A];2010年云南電力技術論壇論文集（文摘部分）[C];2010年

6 米朝輝;;500kV變電站運維管理方式初探[A];山東電機工程學會2012年度學術年會論文集[C];2012年

7 胡道徐;沃建棟;;智能變電站虛回路體系[A];中國水力發電工程學會繼電保護專業委員會2009年年會——暨學術研討會學術論文集[C];2009年

8 邴光;馮士武;胡桂燕;;變電站設備發熱的檢查與判斷[A];山東電機工程學會第五屆供電專業學術交流會論文集[C];2008年

9 湯建華;汪雯s，

本文編號：1418942