本文關鍵詞：降低潛水電機附加損耗的定轉子槽形優化研究　出處：《合肥工業大學》2016年碩士論文　論文類型：學位論文

  更多相關文章： 潛水電機 附加損耗 降耗措施 槽形優化

【摘要】：電機的附加損耗是指除去基本鐵耗、基本銅耗和機械損耗外的所有損耗,其數值大小影響著電機的效率與溫升。隨著社會各界對節能和環保要求的提高以及當前國民生產生活中對電機的性能要求的提升,降低電機的附加損耗成為電機行業內一項重要的研究目標。潛水電機作為籠型感應電機的一種,廣泛的應用在搶險防洪、農業灌溉和生活供排水等重要場合。本文以干式潛水電機為例,研究了籠型感應電機附加損耗與定轉子槽形之間的關系,并對以降低附加損耗為目標的槽形優化進行了探討。主要工作內容如下：(1)分析潛水電機的發展動態,尤其對潛水電機的結構特點進行研究和對比。探討電機附加損耗的研究狀況,對附加損耗的產生原因、影響因素、計算方法以及降耗措施進行詳細的分析和總結。討論了通過優化定轉子槽形來降低附加損耗的可能性和其優點所在。(2)以1000kW,10kV的干式潛水電機為例,利用解析法和有限元法分別對其附加損耗進行詳細的實例計算,并對結果進行對比和分析。(3)通過建立多個不同定轉子槽形和尺寸的電機模型,利用二維有限元法對其電磁場分布和附加損耗情況進行分別計算,分析附加損耗與槽形及尺寸間的關系,并對其變化趨勢進行擬合和預測,以此尋找對應于附加損耗最小的最優槽形和最佳尺寸。(4)根據得到的附加損耗與定轉子槽形及尺寸間的關系,并考慮電機設計的其他要求,探索出一種新的槽形優化方法,在不改變電機其他性能的基礎上使得電機的附加損耗降為最低。
[Abstract]:The additional loss of the motor refers to all the losses except for the basic iron consumption, the basic copper consumption and the mechanical loss. Its numerical value affects the efficiency and temperature rise of the motor. With the improvement of energy saving and environmental protection requirements from all walks of life and the improvement of the performance requirements of the motor in the current national production and life. Reducing the additional loss of the motor has become an important research objective in the motor industry. As a cage induction motor, submersible motor is widely used in emergency flood control. Taking dry submersible motor as an example, the relationship between additional loss of cage induction motor and stator and rotor grooves is studied in this paper. The optimization of grooves with the aim of reducing additional loss is discussed. The main work is as follows: 1) the development trend of submersible motor is analyzed. In particular, the structural characteristics of submersible motor are studied and compared. The research status of additional loss of submersible motor is discussed, the cause of additional loss and the influencing factors are discussed. The calculation method and the measures of reducing consumption are analyzed and summarized in detail. The possibility of reducing the additional loss by optimizing the stator and rotor grooves and its advantages are discussed. The additional loss of 10 kV dry submersible motor is calculated by using the analytical method and the finite element method respectively. The results are compared and analyzed. (3) by establishing many motor models with different stator and rotor grooves and sizes, the electromagnetic field distribution and additional loss are calculated by using two-dimensional finite element method. The relationship between additional loss, groove shape and size is analyzed, and its changing trend is simulated and predicted. According to the relationship between the additional loss and the groove shape and size of stator and rotor, the other requirements of motor design are considered. A new groove optimization method is developed to minimize the additional loss of the motor without changing the other performance of the motor.
【學位授予單位】：合肥工業大學
【學位級別】：碩士
【學位授予年份】：2016
【分類號】：TM346

【參考文獻】

相關期刊論文 前10條

1 鮑曉華;盛海軍;單麗;姚維法;;高壓濕式潛水電機轉子三維溫度場分析[J];大電機技術;2013年01期

2 師陽;趙斌;;異步電動機負載時高頻附加損耗的分析與計算[J];南通紡織職業技術學院學報;2012年04期

3 趙海森;劉曉芳;楊亞秋;羅應立;陳偉華;;基于時步有限元分析的超高效電機定子槽形優化設計[J];中國電機工程學報;2011年33期

4 鮑曉華;呂強;王瑞男;朱慶龍;劉冰;;大型高壓干式潛水電機定子三維溫度場有限元分析[J];大電機技術;2011年06期

5 趙海森;劉曉芳;羅應立;陳偉華;;轉子斜槽及不同槽斜度對鼠籠式異步電機損耗影響的時步有限元分析[J];中國科學:技術科學;2011年10期

6 康燕琴;上官璇峰;肖家樂;;圓筒型直線感應電機的遺傳優化設計[J];機電工程;2008年08期

7 楊樞林;段淑貞;秦斌;;三相異步電動機中的槽形對空載附加損耗的影響[J];機械管理開發;2007年01期

8 伍慶體;磁性槽楔的研究和應用[J];電機技術;2005年02期

9 李軍麗,胡春雷;磁性槽楔在電機節能技術中的應用[J];中小型電機;2005年02期

10 路俊秀;干式潛水電泵的密封問題[J];中小型電機;1997年06期

，

本文編號：1376480