本文關鍵詞：電廠生產分布式控制系統設計　出處：《東北石油大學》2016年碩士論文　論文類型：學位論文

  更多相關文章： 現場總線技術 分散控制系統 工業以太網

【摘要】：近年來,現場總線技術與分散控制系統受到人們的極大關注。針對電廠中出現的信息不能及時共享、不能實時監控等問題,基于現場總線技術和分散控制系統開展電廠生產分布式控制系統設計課題,具體如下:本文首先介紹了課題的研究背景、目的和意義,對現場總線技術國內外研究現狀進行了闡述,通過對IEC現場總線種類進行分析,闡明了常用的現場總線技術及其優點,并闡述了現場總線技術對分散控制系(Distributed control system簡稱DCS)發展的影響。其次進行電廠的需求分析,對熱電廠生產工況進行簡單介紹,全面分析了電廠生產控制系統的基本組成。詳細介紹了DCS在工程實例中的應用及課題實施過程,為了解決信息不能及時共享等問題,利用工業以太網實現了DCS系統與PLC系統的通信,搭設了全廠生產控制信息網,建成生產實時監測分析系統,設計和實現了實時數據庫,建立實時安全分析系統。最后進行工程設計及實現,采用工業以太網及EPA現場總線技術進行循環水泵房設計,使電廠各生產過程全面實現自動化,并在集控室、調度室分別對各生產環節進行實時監控,取消崗點人員,達到減員增效和安全生產的目的,此外還對整個電廠的經濟運行情況進行了優化分析,提高了整個熱電廠的自動化和管理水平。通過這套電廠生產分布式控制系統的設計,為其他電廠的發展做了理論與實踐的鋪墊。
[Abstract]:In recent years, field bus technology and decentralized control system have received great attention. In view of the problems occurred in the power plant information can not be shared, not real-time monitoring, field bus technology and distributed control system to carry out the power plant distributed control system design based on the subject as follows: This paper firstly introduces the research background, purpose and significance of the topic, the status quo of the domestic and foreign research of field bus technology is discussed, based on the IEC field bus type analysis, the fieldbus technology and its advantages in common use, and expounds the fieldbus technology of distributed control system (Distributed control system referred to as DCS) development impact. Secondly, the demand analysis of the power plant is carried out, the production conditions of the thermal power plant are briefly introduced, and the basic composition of the power plant production control system is fully analyzed. This paper describes the application of DCS in engineering and project implementation process, in order to solve the problem of information can't be shared in time, realize the communication of DCS system and PLC system based on Industrial Ethernet, the erection of the information network of production control, built production real-time monitoring and analysis system design and implementation of real-time database, real-time security analysis system. The final engineering design and implementation, using industrial Ethernet and EPA fieldbus technology for circulating water pump house design, make the power plant the production process automation to realize, and in the control room, control room respectively to conduct real-time monitoring of the production process, cancel the post point staff, to achieve the purpose of safe production and downsizing, in addition to the power plant economic operation were optimized to increase the level of automation and management of thermal power plant. Through the design of the distributed control system for the production of the power plant, the theoretical and practical paving for the development of other power plants is made.
【學位授予單位】：東北石油大學
【學位級別】：碩士
【學位授予年份】：2016
【分類號】：TP273;TM621

【相似文獻】

相關期刊論文 前10條

1 周遠成,劉燕平;電廠應采用全員規范化生產維修[J];電力情報;2000年03期

2 梁艷明,向s沌，

本文編號：1343897