【摘要】：通過熔融共混法制備出聚甲醛(POM)/熱塑性聚氨酯(TPU)復合材料。采用差示掃描量熱儀測試(DSC)、脆化溫度測試、掃描電子顯微鏡(SEM)、力學性能測試分析了TPU添加量與POM復合材料結晶度和低溫性能的關系。結果表明:隨著TPU添加量的增加,POM/TPU的常溫和低溫韌性增大,當TPU含量為10%時,POM/TPU復合材料脆性溫度為-39℃,在-30℃下POM復合材料的缺口沖擊強度提高了47%;TPU的加入降低了POM/TPU的結晶度,對POM有良好的低溫增韌作用。
[Abstract]:Polyformaldehyde (POM) / thermoplastic polyurethane (TPU) composites were prepared by melt blending. The embrittlement temperature of (DSC), was measured by differential scanning Calorimeter (DSC). The relationship between the amount of TPU and the crystallinity and low temperature properties of POM composites was analyzed by scanning electron microscope (SEM),). The results show that with the increase of TPU content, the toughness of POM/TPU composites increases at room temperature and low temperature. When the content of TPU is 10%, the brittle temperature of POM/TPU composites is-39 鈩，

本文編號：2509018