氟氮摻雜的有序介孔碳材料合成實驗研究
發布時間:2019-05-27 18:17
【摘要】:采用硬模板法,使用價格低廉的間苯二酚作為炭前驅體,采用氟化銨作為氟氮來源,合成氟氮摻雜的有序介孔碳(F-N-OMC)。在1 000℃時制備的氟氮摻雜的有序介孔碳材料中,大量的氟氮原子(F原子數分?jǐn)?shù)為0.35%,N為2.25%)均勻注入到高表面積的石墨化碳基體(671.3cm~2/g)和有序介孔通道內(6.2nm)。碳骨架內的氟氮原子的合成效果可以顯著地極化相鄰碳原子,并推動由缺陷引發的氧還原反應活性部位的形成。這將有助于氧還原反應性能的提高,因此氟氮摻雜的介孔碳材料有望成為高效的氧還原反應催化劑。
[Abstract]:Ordered mesoporous carbon (F-N-OMC) doped with fluorine and nitrogen was synthesized by hard template method using resorcinol as carbon precursor and ammonium fluoride as source of fluorine and nitrogen. In the ordered mesoporous carbon materials with fluorine and nitrogen doping prepared at 1000 鈩,
本文編號:2486374
[Abstract]:Ordered mesoporous carbon (F-N-OMC) doped with fluorine and nitrogen was synthesized by hard template method using resorcinol as carbon precursor and ammonium fluoride as source of fluorine and nitrogen. In the ordered mesoporous carbon materials with fluorine and nitrogen doping prepared at 1000 鈩,
本文編號:2486374
本文鏈接:http://sikaile.net/kejilunwen/cailiaohuaxuelunwen/2486374.html
最近更新
教材專著