【摘要】：以金屬鉭粉為鉭源,采用原位反應法在炭纖維表面成功制備出連續的TaC涂層,研究了涂層炭纖維的相組成、微觀形貌和抗氧化性能,并探究了炭纖維表面連續TaC涂層的形成機理。結果表明,在溫度為1000~1400℃時能在炭纖維表面制備出TaC涂層,反應溫度和時間顯著影響涂層厚度以及涂層與炭纖維基體的結合性能;反應溫度為1200℃時制備的涂層均勻致密,與炭纖維基體結合較好,涂覆TaC涂層后炭纖維的起始氧化溫度提高了200℃。從動力學角度分析了TaC涂層的生長機理,結果表明Ta原子沿炭纖維軸向發生表面擴散,Ta原子的表面擴散行為是連續TaC涂層形成的關鍵因素。
[Abstract]:Continuous TaC coating was successfully prepared on the surface of carbon fiber by in situ reaction using tantalum powder as tantalum source. The phase composition, microstructure and oxidation resistance of coated carbon fiber were studied. The formation mechanism of continuous TaC coating on the surface of carbon fiber was also investigated. The results show that the TaC coating can be prepared on the surface of carbon fiber at the temperature of 1000 鈩，

本文編號：2466892