【摘要】：采用OM、SEM、EDS、EPMA、顯微硬度和剪切試驗等方法,研究了H62黃銅中間層20鋼/304不銹鋼瞬間液相擴散結合區組織與性能。結果表明,結合區發生Fe、Cr、Ni、Cu、Zn原子互擴散,異種金屬界面獲得良好的冶金結合,抗剪強度可達到270 MPa以上;碳鋼/黃銅界面有含Cr、Cu、Ni、Zn的"島狀"富鐵相形成,擴散溫度由950℃增加至1100℃,島狀組織形態由不連續狀轉變?yōu)檫B續狀,并向黃銅中間層中生長,隨著擴散時間的延長,貫穿于中間層,使結合區硬度增加,抗剪強度提高;950℃擴散復合,碳鋼/黃銅界面有鉻碳化物形成,剪切斷裂發生該處,斷口呈脆性穿晶斷裂;1100℃擴散復合,碳鋼/黃銅界面無鉻碳化物形成,剪切斷裂發生在黃銅/不銹鋼界面,斷口呈韌性斷裂。
[Abstract]:The microstructure and properties of transient liquid diffusion bonding zone of H62 brass interlayer 20 steel / 304 stainless steel were studied by means of OM,SEM,EDS,EPMA, microhardness and shear test. The results show that the interdiffusion of Fe,Cr,Ni,Cu,Zn atoms occurs in the bonding region, and good metallurgical bonding is obtained at the interface of dissimilar metals, and the shear strength is over 270MPa. A "island" Fe-rich phase containing Cr,Cu,Ni,Zn was formed at the interface of carbon steel and brass. The diffusion temperature increased from 950 鈩，

本文編號：2448524