【摘要】：通過對碳纖維編織復合材料的拉伸實驗,利用聲發射技術(Acoustic Emission,簡稱"AE")和數字圖像相關(Digital Image Correlation,簡稱"DIC")方法研究碳纖維復合材料的損傷演化規律。通過采集試件在拉伸過程中的聲發射信號、損傷變形與應變場信息,分析碳纖維編織復合材料的力學加載、變形場和聲發射特征參數的關系。結果表明復合材料的位移場、應變場信息以及AE信號特征參數能良好地描述復合材料在拉伸狀態下的損傷累積和破壞過程。在加載前期,以40~60 dB低幅度信號為主;隨著載荷增加,撞擊累計數急劇升高,高幅度、高持續時間信號增多。通過DIC測得的位移場和應變場信息,發現對于相同的載荷增量,加載方向的位移和最大拉應變呈先增加后減小的趨勢。
[Abstract]:The damage evolution of carbon fiber braided composites was studied by means of acoustic emission (Acoustic Emission,) and digital image correlation (Digital Image Correlation, ("DIC"). The relationship among mechanical loading, deformation field and acoustic emission characteristic parameters of carbon fiber braided composites was analyzed by collecting acoustic emission signals and information of damage deformation and strain field during tensile process. The results show that the displacement field, strain field information and AE signal characteristic parameters can well describe the damage accumulation and failure process of the composite under tensile condition. In the early stage of loading, the low amplitude signal of 40 ~ 60 dB is the main signal, and with the increase of the load, the impact accumulative count increases sharply, the high amplitude and the high duration signal increase. Through the information of displacement field and strain field measured by DIC, it is found that for the same load increment, the displacement and maximum tensile strain of loading direction increase first and then decrease.
【作者單位】： 河北大學無損檢測研究所;河北大學綜合實驗中心;
【基金】：國家自然科學基金(11502064) 河北省自然科學基金(E2016201019,F2015201215)
【分類號】：TB332;TQ342.742

【相似文獻】

相關期刊論文 前3條

1 吳曉青,李嘉祿,崔振興,王曉生;三維整體編織復合材料管的設計與制造[J];玻璃鋼/復合材料;1998年04期

2 郭建輝;;“基于三維數字圖像的編織復合材料熱彈性多尺度分析”項目通過市科委驗收[J];天津工業大學學報;2009年03期

3 ;[J];;年期

，

本文編號：2403941