【摘要】：研究了雙馬來酰亞胺樹脂定型劑含量對0°/90°雙軸向經編織物(Non-crimp fabric,NCF)定型效果、液態成型工藝性、復合材料力學性能的影響。采用厚度回彈、C型回彈的方法表征定型效果;采用厚度壓縮與偏軸拉伸實驗表征帶定型劑織物成型工藝性;并采用彎曲實驗與層間剪切實驗表征復合材料力學性能。實驗結果表明定型劑的添加顯著提高了NCF織物的預定型效果;經定型劑處理后NCF織物的面內剪切模量有了較大提高,抗剪切變形能力增強;添加定型劑對0°/90°雙軸向NCF織物復合材料的力學性能影響不大,但在改善其工藝性的同時并不會降低其復合材料的力學性能。
[Abstract]:The effects of bismaleimide resin content on the setting effect of 0 擄/ 90 擄biaxial warp knitted fabric (Non-crimp fabric,NCF), liquid molding technology and mechanical properties of composites were studied. Thickness springback and C-type springback were used to characterize the setting effect; thickness compression and eccentric tensile tests were used to characterize the formability of the fabric with styling agent; and the mechanical properties of the composites were characterized by bending test and interlaminar shear test. The results showed that the pre-setting effect of NCF fabric was significantly improved by adding the setting agent, the in-plane shear modulus of NCF fabric was greatly improved and the shear deformation resistance of NCF fabric was improved. The addition of setting agent has little effect on the mechanical properties of 0 擄/ 90 擄biaxial NCF fabric composites, but it can not reduce the mechanical properties of the composites while improving their processing properties.
【作者單位】： 北京航空航天大學材料科學與工程學院;中航復合材料有限責任公司中航工業復合材料技術中心;
【分類號】：TB332

【參考文獻】

相關期刊論文 前10條

1 李陽;肇研;劉剛;李書鄉;李龍;李燁;;國產CCF300碳纖維及其NCF織物的性能[J];航空學報;2014年10期

2 李麗英;孟松鶴;張濤;王國勇;田正剛;;定型劑對單軸向經編織物復合材料力學性能影響的試驗研究[J];復合材料學報;2014年02期

3 烏云其其格;胡仁偉;何丹;郭楠;;定型劑對復合材料性能影響的研究[J];高科技纖維與應用;2013年02期

4 蔡吉U，

本文編號：2403602