【摘要】：采用注塑成型法制備PP-R復合材料,并結合掃描電子顯微鏡(SEM)、示差掃描量熱儀(DSC)、偏光顯微(POM)及X射線衍射分析儀(XRD)等技術,研究了PP-R復合材料的力學性能及結晶行為。結果表明,成核劑(WBGⅡ)對PP-R復合材料綜合性能的影響較為明顯。加成核劑(WBGⅡ)后,PP-R(RP2400)的沖擊強度(29.76 kJ/m~2)與PP-R(T4401)的沖擊強度(28.68 kJ/m~2)分別增為56.63、46.82 kJ/m~2,各自提高了90.29%、63.25%;而對拉伸強度和彎曲強度的影響較小。同時,成核劑(WBGⅡ)的加入,能促進PP-R復合材料晶粒細化,誘導α晶型向β晶型轉變,從而改善其沖擊韌性。
[Abstract]:PP-R composites were prepared by injection molding, and combined with scanning electron microscope (SEM), differential scanning calorimeter (SEM), polarizing microscope (POM) and X-ray diffraction analyzer (XRD). The mechanical properties and crystallization behavior of PP-R composites were studied. The results show that the effect of nucleating agent (WBG 鈪，

本文編號：2356803