【摘要】：以玻璃纖維多軸向經編針織物為增強體,以環(huán)氧樹脂為基體,將玻璃短纖維添加到玻纖織物增強體層之間,制備層間含有玻璃短纖維的多層多軸向經編復合材料。利用萬能力學材料試驗機對復合材料的層間撕裂性能進行測試和電鏡掃描,對撕裂后的復合材料層間形態(tài)進行了觀察,研究了玻璃短纖維對復合材料層間性能的影響。結果表明,玻璃短纖維增韌處理的復合材料層間撕裂性能明顯增強,載荷-位移曲線初始斜率大,復合材料不易被以撕裂形式為主的載荷破壞。
[Abstract]:Using glass fiber as reinforcement and epoxy resin as matrix, glass staple fiber was added between glass fiber fabric reinforcement layer to prepare multi-layer multi-axial warp knitted composite containing glass staple fiber. The interlaminar tear properties of composites were measured by universal mechanical material testing machine and scanning electron microscope. The interlaminar morphology of the composites after tearing was observed and the effect of short glass fibers on the interlaminar properties of composites was studied. The results show that the interlaminar tear properties of the composites toughened by short glass fibers are obviously enhanced, the initial slope of load-displacement curves is large, and the composites are not easily destroyed by the main form of tearing load.
【作者單位】： 江南大學教育部針織工程技術研究中心;
【基金】：國家博士后科學基金項目(2016M591767) 江蘇省自然科學基金項目(BK20151129)
【分類號】：TB332;TQ327.1

【相似文獻】

相關期刊論文 前1條

1 王君;第36屆SPI學術年會論文題錄[J];玻璃鋼;1981年06期

相關碩士學位論文 前1條

1 吳澤敏;復合材料氣瓶應力分析及性能優(yōu)化[D];大連理工大學;2015年

，

本文編號：2301464