【摘要】：通過壓縮性能和剪切性能實驗,對同一密度的傳統芳綸紙蜂窩芯、開槽芳綸紙蜂窩芯以及有孔芳綸紙蜂窩芯的主要力學性能進行了對比分析。實驗表明,同一密度的傳統蜂窩芯的壓縮性能和剪切性能優于兩種特殊蜂窩芯,但兩種特殊蜂窩芯的主要力學性能能夠達到傳統芳綸紙蜂窩芯標準中出廠檢驗指標值的77%以上,能夠滿足多數特殊結構的使用要求。對兩種特殊芳綸紙蜂窩芯的制造工藝和實際應用進行了對比分析,指出了各自的優勢和劣勢。兩種特殊蜂窩芯的W向剪切模量均高于指標值。開槽蜂窩芯較有孔蜂窩芯制造工藝簡單、制造周期短、制造成本低,但有孔蜂窩芯制造精度更高、應用范圍更加廣泛。
[Abstract]:The main mechanical properties of traditional aramid paper honeycomb core slotted aramid paper honeycomb core and porous aramid paper honeycomb core of the same density were compared and analyzed by compression and shear tests. The experimental results show that the compression and shear properties of the traditional honeycomb cores of the same density are superior to those of the two special honeycomb cores, but the main mechanical properties of the two special honeycomb cores can reach more than 77% of the factory inspection index in the traditional aramid paper honeycomb core standard. Able to meet the requirements of most special structures. The manufacturing process and practical application of two special aramid paper honeycomb cores are compared and analyzed, and their respective advantages and disadvantages are pointed out. The W shear modulus of the two special honeycomb cores is higher than the index value. The manufacturing process of slotted honeycomb core is simpler than that of perforated honeycomb core, the manufacturing period is short, the manufacturing cost is low, but the manufacturing precision of honeycomb core with hole is higher and the application range is more extensive.
【作者單位】： 中航復合材料有限責任公司;
【分類號】：TB383.4

【相似文獻】

相關期刊論文 前5條

1 周祝林;;浸漬鋁蜂窩芯子剪切特性分析[J];玻璃鋼;1999年04期

2 陳夢成;陳玳珩;;正六角形蜂窩芯層面內等效彈性參數研究[J];華東交通大學學報;2010年05期

3 劉剛,柯映林;方向舵紙基蜂窩芯零件夾持方法研究[J];航空材料學報;2004年05期

4 祝濤;王德禹;;蜂窩芯層非線性等效彈性參數[J];上海航天;2008年04期

5 周祝林;姚輝;劉劍;閻勇;;蜂窩芯子面內彈性常數的理論分析及與試驗值比較[J];玻璃鋼;2007年01期

相關碩士學位論文 前2條

1 宋忠超;蜂窩芯類復合材料零件數字化測量方法研究[D];西南交通大學;2017年

2 李天齊;蒙皮蜂窩芯板結構的穩定性分析與優化設計[D];中國科學技術大學;2015年

，

本文編號：2239539