本文選題：耦合區域 + 對稱非均勻�。� 參考：《復合材料學報》2017年07期

【摘要】：為了研究復合材料風力機葉片的彎扭耦合效應,將風力機葉片簡化為對稱非均勻鋪層層合板梁,采用實驗和數值分析方法研究耦合區域?qū)θ~片彎扭耦合效應的影響。給出了對稱非均勻?qū)雍习辶旱匿亴臃绞郊捌渲谱鞴に?設計了對稱非均勻?qū)雍习辶旱膹澟ゑ詈闲?yīng)實驗,給出了實驗原理及測量方法,測量了對稱非均勻?qū)雍习辶旱膿隙群团まD(zhuǎn)角�；贏NSYS軟件建立了對稱非均勻?qū)雍习辶旱挠邢拊Ｐ?計算了在集中力載荷作用下梁的變形。通過有限元數值分析結果與實驗結果對比,結果表明:耦合區域?qū)?duì)稱非均勻?qū)雍习辶旱淖冃涡袨楫a(chǎn)生重要影響,采用中部耦合區域鋪層方式可以獲得顯著的彎扭耦合效應。
[Abstract]:In order to study the bending and torsion coupling effect of the blade of a composite material wind turbine, the blade of the wind turbine is simplified as a symmetrical and nonuniform layer laminate beam. The effect of the coupling region on the bending and torsion coupling effect of the blade is studied by experiment and numerical analysis. The experimental principle and measurement method of the bending and torsion coupling effect of the uniform laminated plate beam are given. The deflection and torsion angle of the symmetrical inhomogeneous laminate beam are measured. Based on the ANSYS software, the finite element model of the symmetrical inhomogeneous laminate beam is set up. The deformation of the beam under the load of the concentrated force is calculated. The results of the finite element numerical analysis and the results of the finite element analysis are given. The experimental results show that the coupling region has an important influence on the deformation behavior of the symmetrical inhomogeneous laminate beam, and a significant bending and torsional coupling effect can be obtained by using the middle coupling zone layer mode.
【作者單位】： 華北電力大學科技學院;華北電力大學能源動力與機械工程學院;
【基金】：國家自然科學基金(51675179) 河北省科技支撐技術項目(16214304D) 中央高�；究蒲袠I(yè)務費專項資金(13MS82;2014ZD33)
【分類號】：TB33;TK83
，

本文編號：1976239